µCAN.4.sg-BOX

The 8 terminals of the µCAN.8.dio-BOX may individually be set to act as digital inputs or digital outputs. The module preprocesses and filters the digital signals. Its CAN interface supports the protocols CANopen, CANopen FD and J1939.Digital input or output Galvanically isolated fieldbus Input or output freely configurable Each output to be charged with max. 1 A Output drivers can be supplied separately Current measurement per output Status indicator for each input / output Protected against mechanical impact Fieldbus CAN / CAN FD Protocol CANopen / CANopen FD Protocol J1939 / Raw CAN

MicroControl’s I/O modules of the µCAN-BOX product family provide the link for digital and analogue I/O signal networking on a CAN bus. The premium electronics of our µCAN modules facilitates connection of a wide range of sensors and actuators. A/D conversion directly on the spot has significant advantages: due to their robust design the modules may be installed directly at the signal source – even in adverse environmental conditions. An additional control cabinet is not needed. The electronics of the µCAN-BOX series is tightly packed in a rugged aluminium casing (IP66 rated) protecting it reliably from dust and water. Signal wires may be connected via metric cable connectors or M12 plug-in connectors.

The µCAN.4.ci-BOX is equipped with 4 fast counters of up to 100 kHz. The CAN module acquires and processes the binary pulses and transmits them to a higher-level systemCounter input / frequency measurement A/B signal Max. input frequency 500 kHz Galvanically isolated fieldbus High precision frequency measurement Signal type freely configurable Up or down counter Protected against mechanical stress Fieldbus CAN Protocol CANopen / RawCAN