Alpha 477
Crimping machine
Description
The Alpha 477 fully automatic double crimping machine allows you to process two different wires simultaneously to produce your choice of double crimp or single wires. With four processing stations at the lead termination and two at the trailing end, you have a large number of possible processes at your command. The two wire drives are fitted with highly dynamic AC-servo axes and an integrated anti-slip system. With this sophisticated handling technology, two wires can be fed in parallel and their ends cut to length and terminated in a controlled process. Wires are handled gently throughout. For example, the gripping force exerted on the two wires can be programmed separately and saved for each wire. The two wires are brought together in the double gripper module, where double crimps can be produced either side by side or one above the other.
- Electric and electronic components - machines for manufacturing
- Crimp to Crimp
Product characteristics
- Length range
- 60mm - 80000mm (2.36in - 3149.61in)
- Length range
- Optional from 35mm (1.38in)
- Length accuracy
- ±(0.2% +1.0mm (0.04in.)
- Stripping lengths
- Both ends 0.1-35mm
- Wire cross sections
- 0.22mm² – 4mm²(AWG24–AWG12)
- Wire cross sections
- Optional from 0.13mm² (AWG26)
- Wire cross sections
- Cross section ratio > 1:4
- Wire cross sections
- Double crimp (wire A+B) < 6mm²
- Wire feed speed
- max. 10m/s
- Noise level
- <75dB (without applicators)
- Electrical connection
- 3x208-480V/50-60Hz; 7kVA
- Pneumatic connection
- 5-6bar
- Air consumption
- 22m³/h
- Weight
- Approx. 1900kg (including 2m conveyor belt, two crimping modules and two seal modules)
Documents
Similar products
UNIFLEX-HYDRAULIK GMBH
Germany
Due to their compact, all-round accessible construction, high level of user friendliness, and long service life, the HM4xx set the standard for quality and cost effectiveness. The crimpers‘ particularly large opening stroke and the use of long master dies allow you to crimp all types of fittings and up to 8" industrial hoses.
SHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the parts made by brass, then after colorful plating, the products mainly used in electronic product field.
TECHNO-COMPOSITES DOMINE GMBH
Germany
Contract Manufacturing TC Domine is a dependable partner for the highprecision machining of components made of thermoplastics and glass fibre or carbon fibrereinforced plastic. Six modern CNC machines with up to five axes can machine components 6,140 mm long, 1,900 mm wide and up to 500 mm high. As such, we are able to design and manufacture the necessary parts inhouse. Subsequent processing steps such as gluing, painting and assembling addon components are an integral part of what we do.
Request for quotes
Create one request and get multiple quotes form verified suppliers.
- Only relevant suppliers
- Data privacy compliant
- 100% free