Welbee W400: Precise adjustment and arc stability – even in the lower welding area* Precise adjustment of energy input due to AC pulse welding process * High-speed AC pulse welding due to improved features for the respective material * Welding shape looks like TIG welding process due to AC wave pulse technology * High melting rate, weld penetration control * Extended application scope due to 400 A at 40% rated duty cycle
Germany
— Gas-cooled DC TIG inverter welding machine — TIG welding with high frequency starting — TIG lift arc welding without HF — MMA welding — MMA pulse welding and pulsed TIG welding up to 2 kHz — Reduced secondary current accessible using torch trigger — Adjustable up-slope/down-slope — Adjustable gas pre-flows/post-flows — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function — Energy-saving thanks to high efficiency and standby function — Portable, including shoulder strap — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage
Request for a quoteGermany
Mobile inverter power source for TIG manual or orbital welding with built-in cooling system and gas sensor. Can be used with all Orbitec controllers, particular in high-demand applications such as tube-to-tube-sheet. Technical Data: Output: DC Mains voltage: AC 3 x 400V Mains frequency: 50 / 60Hz Power rating: 15 kVA Generator output: 20.3 kVA Current range: 5A – 350A Welding current: - 60% TIG / MMA: 350A - 100% TIG / MMA: 300A Cooling efficiency: 1500W Water column: 35m / 5l / min. Tank capacity: 12l Weight: 131kg Dimensions (L x W x H): 1100 x 455 x 1000 mm Package includes: - Inverter - Power cable - 10l coolant
Request for a quoteGermany
Repair and service for SolarEdge inverters The SolarEdge single-phase inverter with HD-Wave technology represents a quantum leap in PV inverter technology. Since the MPPT and voltage control for each PV module is carried out separately by the SolarEdge power optimizer, the single-phase inverter only converts direct current into alternating current. With the repair of SolarEdge inverters, problems and error messages with SolarEdge inverters are not only identified by us, but also resolved in the form of a complete product overhaul of your SolarEdge photovoltaic inverter. The technical expertise and service competence of our company is based on decades of repair experience in the field of maintenance of industrial electronics, in which BVS Industrie-Elektronik GmbH is one of the industry leaders.
Request for a quoteTurkey
Inverters are used to convert the energy obtained from DC source or battery into AC energy in places where there is no grid. They can be produced starting from 50 VA up to 100 kVA, depending on the need. The inverter, produced using high PWM frequency and IGBT technology with Necron Energy quality assurance, gives full sinusoidal output. Since they are designed with all kinds of protection (overcurrent, overheat, short circuit, low voltage) in mind, the risk of failure is very low and they are very durable and long-lasting. They are available in single-phase and three-phase outputs, at frequencies of 50 Hz, 60 Hz, 83.3 Hz and suitable for 110 VAC, 220VAC and 380 VAC output voltage values.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.