Asco Co2 Gas Detector
Description
ASCO CO2 Gas Detectors are used to protect personnel wherever CO2 gas or dry ice is used in closed areas, for example during dry ice blasting or when producing dry ice. ASCO offers wallmounted solutions for area monitoring and portable devices for personal protection. ASCO CO2 Gas Detectors ensure continuous and automatic CO2 content measuring in the ambient air using infrared absorption measuring (NDIR). This technology is very troubleresistant to temperature variations or air draughts and therefore measures very accurately. The CO2 gas detectors are very simple to handle and all components are built splash proof.
- Cooling and lubrication pumps
- Gas Detector
- Troubleresistant Temperature
- Asco Detector
Product characteristics
- Detector AGS Material box
- plastic (IP54)
- Detector AGS Voltage / Power supply / DC
- 9 - 32 VDC (12 – 32 VDC recommended), 2 A
- Detector AGS Max power consumption
- approx. 2 W
- Detector AGS Relay preliminary alarm/alarm
- below 2 A at 30 VDC or 250 VAC, SPDT
- Detector AGS Analog output signal
- 4 - 20 mA
- Sensor Material box
- plastic (IP54)
- Sensor Gas entry
- diffusion
- Sensor Measuring range
- 0 - 5 Vol. % CO2 (0 - 50.000 ppm)
- Sensor Accuracy
- 0.1 Vol. % CO 2 (+ - 100 ppm or + - 5%)
- Sensor Operating temperature
- 0 to +50 ° C
- Detector AGP Alarm settings
- 3 thresholds
- Detector AGP Alarm signals
- audible, visual, vibrating
- Detector AGP Dimensions
- 98 x 50 x 42 mm (3.9 x 2.0 x 1.7 in)
- Detector AGP Weight
- approx. 0.14 kg (0.3 lb)
- Detector AGP Material
- plastic material (IP54)
- Detector AGP Operating conditions
- 0° - 50°C
- Detector AGP Warm up time
- approx. 5 sec
- Detector AGP Resolution
- 1ppm; 0.01 vol% CO 2
- Detector AGP Accuracy
- ±40ppm / ±3% reading
- Detector AGP Gas entry
- diffusion
- Detector AGP Measuring range
- 0-5 vol% CO2
- Detector AGP Calibration interval
- 1 year
- Detector AGP Calibration method
- Nitrogen or ambient air
Documents
Similar products from ASCO CARBON DIOXIDE LTD
ASCO CARBON DIOXIDE LTD
Switzerland
Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required
ASCO CARBON DIOXIDE LTD
Switzerland
The ideal and reliable highflow CO2 pressure reducing valve for use with CO2 gas or liquide. Constructed in brass (C31) and meehanite (C2K32) with stainless steel trim Abrasion and dirt resistant rubber valve seats Dome loading either from inlet line or separate gas supply Stable and noiseless operation Positive gastight shutoff Highflow contoured passages
ASCO CARBON DIOXIDE LTD
Switzerland
The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor. The ASCO CO2 Flowmeter is a complete system which is supplied fully calibrated and wired and therefore very easy to install.
ASCO CARBON DIOXIDE LTD
Switzerland
The ASCO CO2 Dew Point Tester reliably indicates the dew point (moisture content) of your CO2. This equipment makes it easy to measure the dew point of liquid and gaseous CO2. A laminated, illustrated stepbystep short instruction sheet in A3 format and a detailed instruction manual are supplied with each tester. The ASCO CO2 Dew Point Tester (stainless steel) can be used either wallmounted or freestanding. easy handling no calibration required ready for immediate use for gaseous and liquid CO2