CONEC ELEKTRONISCHE BAUELEMENTE GMBH

Germany

Factory icon Manufacturer/ Producer

CONEC ELEKTRONISCHE BAUELEMENTE GMBH
Web icon
53 Products

Germany

Verified by Europages

Field attachable connectors from CONEC give you the freedom and flexibility to react to the cabling situation on site. Practical, cost-effective and, above all, flexible solutions for quick cabling are required for both small series as well as special purpose machines. This program comprises connectors and adapters – naturally with anti-vibration locking – in a straight or angled construction as well as in shielded versions. You can choose between screw-, clamp- and solder termination.

Request for a quote

Germany

Verified by Europages

CONEC offers a comprehensive range of M8x2 and M12x1 sockets for reflow soldering processes. Insulation bodies and female/male sockets are available in different positions and different codings for front panel mounting. The male sockets come with gold-plated contacts, guaranteeing minimum 100 mating cycles. Options are installation heights of 6 mm, 10 mm, 9 mm and 13 mm and versions with or without shielding. The sockets are available as individual parts for manual mounting or as tape & reel packaging for automatic mounting.

Request for a quote

Germany

Verified by Europages

With increasing demands on the efficiency in agriculture, precision farming is becoming more and more important. Precision farming stands for the targeted management of utilized agricultural land, e.g. the individual application of fertilizers and plant protection products depending on the position of the utilized land. To ensure the necessary communication between tractor, equipment and agricultural management software, the non-proprietary ISOBUS is used. ISOBUS is specified in standard ISO 11783-2 and describes the BUS including the connectors used with it. To extend the CONEC product range in the field of connection solutions for agricultural and construction machinery, the connectors for ISOBUS are included in the ready-made and overmoulded design. The overmoulded ISOBUS-series is available as male and female version. The contact carrier has the 9-pin contact image required by the standard.

Request for a quote

Germany

Verified by Europages

USB 3.0 provides data transfer rates 10 times faster than USB 2.0. The USB 3.0 insert was integrated into the CONEC Bayonet Locking housing so it becomes suitable for industrial applications in harsh environment. The new IP67 USB3.0 connector series is available in plastic and metallised plastic and is fully backwards compatible with USB 2.0. Besides the single connector the following cable assemblies are available in different lengths. To protect the connector against dirt and moisture in unmated condition, protection caps with tether are available.

Request for a quote

Germany

Verified by Europages

Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either connected directly to the superordinate system via a homerun cable or via a connection interface. Optional LED displays for signal and power reduce the effort required to track down errors.

Request for a quote

Germany

Verified by Europages

Electric drives, devices and servomotors are increasingly being used in the field directly in the machine or system. In addition to signals and data, more and more power must also be transmitted. Miniaturisation in automation means that field devices and controllers are becoming smaller and smaller. The CONEC Power portfolio includes overmoulded connectors, connectors field attachable and panel mount connectors. The coding options offered are K, L, S, T

Request for a quote

Germany

Verified by Europages

CONEC D-SUBminiature connector dimensions conform to IEC 60807-2 (formerly DIN 41652) or MIL-C-24308. These cable device connectors each consist of a plug jack mating pair and are available in five standardized housing sizes with pole counts of 15, 26, 44, 62 and 78.

Request for a quote

Germany

Verified by Europages

In industry and transport, M12 connectors are used for sensor / actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role. The new CONEC M12 field attachable connector with crimp connection offers the appropriate solution and is available in codings A, B, D, and X.

Request for a quote

Germany

Verified by Europages

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Request for a quote

Germany

Verified by Europages

Adopting Ethernet standards from the office environment into the industrial world has opened up new perspectives for automation technology. From control level via factory networking to field level, communication has to be provided with high transmission rates and in real time in order to enable remote maintenance and control of complete plants and systems via networks. However, the precondition is robust and high-quality connection technology.

Request for a quote

Domain icon Manufacturer/ Producer

CONEC ELEKTRONISCHE BAUELEMENTE GMBH

Ostenfeldmark 16

59557 Lippstadt - Germany

Contact