Control unit - USG
Control unit - USG
Description
The use of pole reversal control devices to control lifting magnets makes it possible to adjust the magnetic field very precisely. Thus, the USGs can be continuously adjusted in holding force and perform a demagnetizing cycle when switched off, which ensures that all parts are released and unwanted residual magnetism in the workpiece is minimized. USG pole reversal control units can be controlled via potential-free contacts with machine controls or pushbuttons in the crane operation and provide feedback on their switching status. As an option, we can also supply manual control units and signal lamp sets to match the pole reversal control units.
Videos
Similar products from FLAIG MAGNETSYSTEME GMBH & CO.KG
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
EHG electromagnetic holding rods are used in fixture construction, for gripper systems and for a wide variety of tasks in mechanical engineering. EHG holding rods consist of a screwed, two-part system, are double-coated and sealed to IP 65. Max. Operating temperature 60°C Standard voltage 24,48,110V DC Protection class IP 53 ED 100%
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.