Controlunit
Generators
Description
The SCU286 has a system for direct measurement of the high voltage delivered by the X-Ray generator to guarantee the accuracy of the radiological parameters. Based on this data the control system maintains the stability of mA and kilovolts to within ± 0.5% in any selection range. SITEX & XS units offer a totally constant quality of exposures, as they are virtually exempt from fluctuations in the power supply. OPERATOR INTERFACE The user-friendly high strength polyester front panel is equipped with a sensory-type 16-key keypad, a high brightness display and an anti-reflection screen. The SCU286 also includes a programmable access codes system that features three security levels (supervisor, operator and service engineer) which limit the access to certain functions in relation to the security level selected. DATABASE First and foremost, our SCU286 control unit is intended to be user-friendly. In order to reduce the number of test shots to a minimum
- Control boxes - electric
- Controlunit Sitex
- Sitexs Controlunit
- Measurement Sitexs
Product characteristics
- kV, mA and time setting steps kV, mA, sec
- 1.0, 0.1, 1.0
- Exposure time range min., sec
- 1 sec to 99 min 59 sec
- Direct kV and mA measurement (Control accuracy) %
- Yes / +0.5 / -0.5
- Simultaneus display of measurements and settings
- Yes
- Pilot light indicator (Power ON, X-ray ON, Securities)
- 3
- Independant START and STOP buttons
- Yes
- Two position safety key rotary switch
- X-ray ON / STANDBY
- Two position main rotary switch
- Mains ON / OFF
- High brightness graphic Vacuum Fluorescent Displays (VFD)
- 2 x 20 with anti-reflection screen
- Preheating is function of selected kVs (kV max by default)
- Automatic
- Exposure time calculator (material, FFD, film, density, kV, mA, time)
- Optional
- User-defined data enabling exposure time calculation
- Optional
- Type of power supply
- Mains, Power generator
- Supply voltage range – SELECTOR FREE – Auto resettable fuses VAC
- From 198 to 264
- Supply frequency range – SELECTOR FREE Hz
- From 45 to 66
- Minimum Power Factor %
- > 0.7
- Max RMS mains current (300 kV / 6 mA - SITEX D3006) A
- 12 at 220 VAC
- Storage ambient temperature range °C
- -40 to +80
- Working ambient temperature range °C
- -25 to +55
- Protection Class
- IP65
- Weight Kg
- 14
- Dimensions without handle mm
- 355 (W) x 157 (H) x 520 (D)
Similar products from TELEDYNE ICM
TELEDYNE ICM
Belgium
The CCU186 control unit for crawlers possesses a distinct advantage compared to existing products. In fact, all of the performances that are usually achieved with standard control units are now available in the crawler configuration. Automatic slow preheating, the progressive rise in voltage with each exposure, as well as a selection of set values are all included in the CCU186. As the CCU186 has been entirely fitted with industrial electronic components, it is perfectly suited to the often extreme conditions of automatic intra-tube control campaigns. GENERATORS All of the generators in the SITEX crawler range are automatically identified and controlled by the CCU186: the interchangeability is total and this can be instantly implemented on-site. Moreover, thanks to a conversion kit, these generators will operate in perfect sync with the SCU286 standard control unit.
TELEDYNE ICM
Belgium
Designed to fit into 6” pipelines and higher, the CP160CR constant potential X-Ray generator for crawlers is – in its category – the most powerful panoramic X-Ray tube head in the world for crawlers. The generator is making the cutting edge constant potential technology of the CPSERIES even more compact into a 9.9 kg – 120 mm diameter X-Ray tube head. The crawler unit is capable of penetrating up to 28 mm of steel in 10 minutes, which corresponds to just a 25 second exposure time for 6” standard pipeline welds.