Many types of materials generate varying types of dust, dependent on the processes and materials used in the production environment. Some of these dusts can be hazardous and potentially explosive – to keep your work space safe and healthy, careful consideration and planning should be applied when considering dust removal systems. Make integratedAIR Systems your trusted dust control partner and we will do the rest. With experience in multiple industries, such as commercial print, corrugated card, beverage cans and many more, we are dedicated to our trade and ready to work with you. Working closely with HSG258 guidance our Design Engineers can make sure that your systems are compliant with whatever regulations that need to be followed depending on the type of dust or fume that needs to be extracted.integratedAIR System ensure our systems are in line with the Dangerous Substances and Explosive Atmosphere Regulations (DSEAR) alongside the ATEX Directive.
Germany
CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!
Request for a quoteFrance
TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.
Request for a quoteFrance
Continuous dust monitoring in ambient air control system areas, silo areas, boiler houses, workstations. AirSafe 2 is an electrodynamic dust sensor monitoring leakages and dust concentration in ambient air in production facilities or workplaces. This versatile sensor allows you to keep under control your ambient environment. An alarm is generated when a threshold is exceeded. • controlled and selfmonitored system • calibratable alarm • prevents creation of dust explosion zones • dust concentrations in the ambient air are safely monitored • AirSafe 2 can be used as early detection for dust which could endanger the workplace adapted for applications in zone 22 dust • possible dust leakage from the process is quickly detected
Request for a quoteCreate one request and get multiple quotes form verified suppliers.