FRANZ EISELE & SÖHNE GMBH & CO KG

Eisele submersible pumps AT have been produced by us since 1972 and are used in the agricultural and industrial sectors. Key data: Simple installation Highly efficient For dry and wet installation Aeration equipment (optional) Many different installation variants Pumps also with carriage trolley From 3.0 - 22.0 kW Eisele submersible pumps AT have been produced by us since 1972 and have proved themselves thousands of times. The pumping of slurry with litter, straw or food residues as well as well as waste water sludge is carried out by a special formed inlet nozzle and a screw impeller with armoured Widia steel (for the S version).

Eisele vertical pumps have proved themselves thousands of times and are superior in quality and performance. Key data: Forced supply through the screw impeller Inlet nozzle and screw impeller with special hard-faced welding Similar method of working as with a shredding machine Absolutely dry-running safe Highly wear resistant mechanical seal, oil bath lubricated With / without mixing nozzle Can be rotated by 235° VM: with three-phased motor that can be overloaded 11.0 / 15.0 / 18.5 / 22.0 kW with conveying capacity up to 6,000 l/min VG: with EISELE angular gear for tractor drive und conveying capacity up to 12,000 l/min Eisele vertical pumps have proved themselves thousands of times and are superior in quality and performance. Many different application possibilities can be perceived with the high-performance pumps.

Key data: Sewage Pumps VAG, rubber mounted with mixing nozzle Suitable as waste water lifting system For pit depths up to approx. 4 m Three-phased motor 2.2-3 kW with switch and 16 A CEE device plug Outputs up to max. 1,000 l/min. The Eisele VAG vertical waste water and slurry pump with mixer cap is characterised by its robustness, that is maintenance-free and its operational safety. Can be used in cellar, collection and sedimentation chambers, in combination with a float switch it protects against flooding and has an output up to 1,000 l/min.

Eisele rotary lobe pumps have been constructed since 1983 and have proved themselves in the agricultural and industrial sectors. Detailed key data here: Rotary lube pump (rotary piston pump) for pumping media up to approx. 30% TS Rotary lobe with metal core and perbunan coating Drive with PTO shaft or electric motor (7.5 / 11.0 / 15.0 / 18.5 / 22.0 kW) Pumping capacity from min. 450 l/min. to 6,000 l/min (depending on the media) Pressure performance 4 - 10 bar The rotary lobes can be changed quicker and easier by opening the four ring nuts of the cover, easy as one-man operation. Vacuum and pressure side can be freely selected by re-plugging the drive shaft Standard with front side-wear plates in the pump housing and cover Mobile pump stations with one or two rotary lube pumps (pumping capacity up to 7,400 l/min.) Eisele rotary lube pumps have proved themselves in the agricultural and industrial sectors. A continuous further development guarantees a high technical standard....

The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. More detailed key data here: Dry self priming - dry-running safe - sucks without auxiliary fluids Sealing of the shaft using highly wear resisting mechanical seal Blockage-free due to open impellers - non-sensitive for the use on construction sites, in the municipal and industrial sectors Mobile or on carriages with three-phased motors of 3.0 / 5.5 / 11.0 kW With diesel engines 3.0 / 6.5 / 12.5 / 22.0 kW output up to 234 m³/h For PTO-drives 15 - 40 kW Output up to 360 m³/h The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. Areas of application are, next to industrial and handicraft businesses, also in ship construction and for emergency services. They are suitable for draining ponds, shafts and construction pits as well as for ground water lowerings, or for pumping waste water.

Eisele submersible mixers have been manufactured since 1982. More detailed key data here: A complete range of products for the agricultural and industrial sectors 2.2 - 22 kW Also as Ex-protected devices For stationary installation or mobile Biogas version The fluidic optimised double blade wide-blade propeller guarantees a high agitating and mixing performance, also for thick liquids. The Eisele motors impermeable to water pressure also guarantee a high running performance.

Application options for the Eisele PTO mixers can be found in industrial businesses and in the agricultural sector. More detailed key data here: Double-start worm forced circulation (sucking) With PTO-drive 30/48 kW or with electric motor 11/15/18.5 kW Threaded spindle with crank Three-point mounting, can be tipped Stable design, highly wear resisting mechanical seal, shaft in an oil bath Agitation shaft length 3,50 – 6,00 m Application possibilities of the Eisele PTO mixers are in industrial business and agricultural sectors. They are the perfect solution for the effortless mixing in slurry tanks or similar using a tractor or other towing vehicle.

Key data: With hydraulic drive 7.5 to 33.5 kW Stable design, highly wear resisting mechanical seal, shaft in an oil bath The fluidic optimised double blade wide-blade propeller is dimensioned as a pitch propeller with a very high mixing performance. Due to the hydraulic drive, the HP slurry mixers are independent from the power supply and have a favourable purchasing price.

Application possibilities of the Eisele slurry mixer are only in the agricultural sector. Key data: Double-start worm forced circulation With PTO-drive 30/48 kW or with electric motor 11/15/18.5 kW Threaded spindle with crank Three-point mounting, can be tipped Stable design, highly wear resisting mechanical seal, shaft in an oil bath Agitation shaft length 3,50 – 6,00 m A higher circulation rate is forced by the double-start worm. A reversing gear can also be mounted for running to the right or left which also permits use without effort under hard conditions. The three-point mounting is used for the quick and simple conversion using the tractor hydraulics. The fastening block also allows stationary installation. The PTO-drive is also a component of the ZQU.

Filling and mixing lines: Filling and mixing line, height and laterally adjustable Filling and mixing line, with removable mixing nozzle Mixing tube made of hard PVC, rotatable with 1 pipe clamp Filling and mixing line, galvanised steel, can be rotated using socket spanners, height and laterally adjustable mixing nozzle Mixing tube made of completely from hard PVC with flange connection with 1 pipe clamp Mixing tube made of completely from hard PVC with flange connection, height and laterally adjustable mixing nozzle with 1 pipe clamp Mixing unit completely galvanised, rotatable, height adjustable with clamp bracket and flange connection Mixing tube completely galvanised with flange connection, mixing nozzle, height and depth adjustable Mixing nozzle completely galvanised with flange connection, fixed mixing nozzle Tank filling line completely galvanised, fixed mounting, 360 degrees rotatable with flange connection Coupling parts,...