GasPro Multiple Gas Detector
Description
The GasPro gas detector can be equipped with sensors for up to five gases with ATEX approval. With the option of equipping the gas detector individually with various sensors, the GasPro gas detector is ideal for use in sewers, sewage treatment plants, landfills, ships, chemical and oil processing industries. An important unique novelty "positive safety" display. The GasPro signals the status at a glance via a three-color LED, green display = everything OK, yellow display = still OK, but a check is due soon, red display = not OK Particularly noteworthy is the loud alarm at 95 db and the optical signaling indicated by two LEDs that can be recognized from each side. The measured gas concentrations are saved every 10 seconds and stored in the internal memory. In addition, various events (switching on, alarm, calibration) are stored in the memory. The collected data can be transferred to a PC with a USB cable. A charging station with interface or a calibration station are also available.
- Gas detectors
- detectors
- Leak detector
- Gas detector
Product characteristics
- Display
- Illuminated LCD display
- Sensors
- Electrochemical sensors, Thermal tone, Infrared
- Protection Class
- IECEx Ex ia d IIc T4 ATEX II 2G Ex ia d IIc T4 Gb
- Standards
- EN60079-29, EN45544, EN61779, EN50270, EN50271, EN61779
- Energy Supply
- Li-ion batteries
- Operating Time
- about 19 hours about 17 hours, with pump
- Weight
- about 340g
- Dimensions
- 43 x 130 x 82 mm
Similar products from SCHÜTZ GMBH MESSTECHNIK
SCHÜTZ GMBH MESSTECHNIK
Germany
Specially developed for the diverse tasks on the construction site, the Schütz Messtechnik company offers tailor-made measuring tools that reliably and comprehensively support the craftsman in all of his work “all around gas”. The complete solution for the load, leak tightness and usability test on gas pipes can be carried out safely and quickly, including documentation. GDPR-compliant as all personal data is protected against unauthorized access by a PIN. The measurement result can be printed out at the test point on site (optional), fully automatically and without interrupting the system. The professional solution for all measurements according to TRGI The prescribed load tests, tightness tests and usability tests, in the interior installation are possible with just one measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included
SCHÜTZ GMBH MESSTECHNIK
Germany
With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement.
SCHÜTZ GMBH MESSTECHNIK
Germany
With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GP 2000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GP 2000 is a professional leak detector for everyday work.
SCHÜTZ GMBH MESSTECHNIK
Germany
With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 is a professional leak detector for everyday work.