INCREASE THE PRODUCTIVITY OF YOUR EXISTING WATERJET CUTTING SYSTEMS BY AT LEAST 30 % With HYPERTRON®, you can reach a 30 to 50 % higher cutting speed and energy efficiency combining servo technology with ultra-high pressure. The HYPERTRON® provides flow rates of 3.5 l per minute with 6,000 bar or 4.6 l per minute with 4,000 bar. Whether you want to work with two cutting heads or only with one cutting head, HYPERTRON® provides the right pressure – from 100 to 6,000 bar. Flexibility and high performance in one. Customers buy European products… because they are adjusted to the requirements of European companies. because they are designed taking into consideration a responsible treatment of our resources. because they are easy to service and all common metrical tools match. because they meet European standards and quality expectations.
Switzerland
This high-pressure pump generates pressures of up to 700 bar with ease, with fine control for precise adjustment. It is perfect for testing manometers and pressure transmitters. The pump must be filled with 100 cm3 of hydraulic oil or water and can therefore fill up even relatively large dead volumes. An additional manometer (not supplied) is needed for reference measurement of the configured pressure. KELLER recommends manometers in the LEX1 series with a suitable pressure range.
Request for a quoteGermany
With a maximum drive power of 1000 kW, the K100000-5G high pressure pump is an extremely powerful pump. As a five-cylinder pump (quintuplex), it offers the possibility of pumping without inlet pressure in many applications. Its special five-cylinder design allows high flow rates without cavitation in the pump. Like its smaller counterpart, the K55000-5G, it is used for larger jetting or hydraulic applications. Special Features Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 10-100% depending on rod force dynamically balanced gear Gear unit with forced lubrication and oil cooling gear ratios i = 3.40 - 4.10 - 4.69 - 5.19 - 6.03 Also available to API 674, including vertical operation Filtration up to 350 µm Special media such as seawater, glycol, methanol, oils etc. on request
Request for a quoteLuxembourg
High Pressure Metering Pump, DMP is applied DUT KOREA’s innovative technology with perfect compati-bility from previous models and stable shipment gives you to help building your polyurethane machine on time. Do not hesitate to contact us for more information Compatibility ‘DMP’ gives you perfect compatibility with your previous models. Light weight Using ‘Duralumin’ case and Simplification of parts inside of ‘DMP’ make amazing lightweight to help metering for operators Maintenance Simplification of ‘DMP’ gives operators to help easy maintenance and repair. Economical Price ■ To prevent flowing backward, it is controlled by actuator (Not by Hydraulic) ■ Semi-permanent product life by super-precision machine ■ High metering accuracy and repeatability ■ Operating pressure up to 220bar ■ Very little pulsation of flow ■ Quite operation ■ Optimum volumetric available ■ Low suction pressure, even when pumping highly viscosity materials ■ It can be used all parts together with Rexroth...
Request for a quoteGermany
Melt pump for building up pressure in the polymer process. The series is the result of a complete revision of the core components used. The BOOSTER-AT is available with flange connections according to EN1092-1 and ANSI B16.5. Thanks to the new gear wheel geometries, differential pressures of up to 320 bar are possible with selected pump sizes. The new design is rounded off by the usual variety of different material combinations. Advantages: Higher efficiency, therefore Less temperature input into the polymer Wider viscosity range possible Larger volume flow range possible Increased safety against shaft breakage in case of overload due to new design
Request for a quoteCreate one request and get multiple quotes form verified suppliers.