Hotmelt for Wood Application

Working with the HB 950 is ideal if the hot-melt adhesive is applied from above. By hanging the hand gun on a balancer, you can work in a way that is gentle on the muscles and tendons. The safety and protection of the user are ensured by the insulation of the handle, which also does not transport any adhesive. A 1.2 mm bead nozzle is pre-assembled. The standard version has a PT100 temperature sensor, others are available on request.

New model for professional use with use of hot melt adhesives granulated or stick diam. 43 mm. and manual advancement (there is no need compressed air). The fusion system in closed tank allows to have in a few seconds a large amount of molten adhesive to a fast dispensing. The temperature is regulated by thermostat at bimetal strip, which ensures a particular strength and wear resistance. It also has a magnetic base that allows you to place it on metal surfaces. Available models: MS 200-TER: model with temperature regulation with thermostat MS 200-LCD: model with temperature adjustment by LCD display

Hotmelt polyester strapping is substitute product of strapping in the past called „Weatherguard“. Since Weatherguard was manufactured with cold glue, Hotmelt strapping is manufactured with hot glue technology. The polyester yarn strands are longitudinally bonded and covered with hot melt glue. Hotmelt strapping is used for light to medium duty applications. It is UV and humidity resistant, but sensitive to high or low air temperature. At low temperatures below 0°C the strap freezes, becomes stiffer and loses the elasticity, but all other features are not affected and once strapped, your merchandise can be stored outdoors at low temperatures without any restrictions. Due to its physical characteristics (hot melt glue), at high temperatures Hotmelt strapping becomes softer and could slip in the buckle under some circumstances (movement of strapped merchandise). Therefore, in this case for outdoors applications in warm regions with air temperatures much above 30°C

Hotmelt polyester strapping is substitute product of strapping in the past called „Weatherguard“. Since Weatherguard was manufactured with cold glue, Hotmelt strapping is manufactured with hot glue technology. The polyester yarn strands are longitudinally bonded and covered with hot melt glue. Hotmelt strapping is used for light to medium duty applications. It is UV and humidity resistant, but sensitive to high or low air temperature. At low temperatures below 0°C the strap freezes, becomes stiffer and loses the elasticity, but all other features are not affected and once strapped, your merchandise can be stored outdoors at low temperatures without any restrictions. Due to its physical characteristics (hot melt glue), at high temperatures Hotmelt strapping becomes softer and could slip in the buckle under some circumstances (movement of strapped merchandise). Therefore, in this case for outdoors applications in warm regions with air temperatures much above