Industrial Ethernet M12x1 Sockets with bayonet quick locking

The CONEC connector series with bayonet quick locking system allows safe and quick locking even in areas that are difficult to reach and/or not visible. With the "three-point" bayonet locking it is possible to lock the connection by hand with a 90 ° turn. You get a direct tactile and acoustic feedback as soon as the connector is locked. The connectors are designed according to the draft standard IEC CD 61076-2-011/Ed1. In order to meet the mechanical requirements with regard to tightness to dust and liquid media in industrial environments, no additional tools are required for the new M12 bayonet version by CONEC. When locked, the requirements of protection degrees IP65, IP67 and IP69K are met. In addition, the new series is shock and vibration resistant according to the railway requirements IEC 61373:2010, class 1B. The CONEC bayonet locking variant thus offers simplified handling and at the same time secure transmission of signals and data to the user.

Special applications have special requirements for connectors. For this field of application, CONEC developed water-tight D-SUB connectors with rating IP67. Owing to special sealing measures at the connector and the sealing frame, the high requirements are met. These connectors are used where dust and spray water occur and functioning of usual connectors would be negatively affected. These connectors are available as standard or high density in the usual pole number.

Field attachable connectors from CONEC give you the freedom and flexibility to react to the cabling situation on site. Practical, cost-effective and, above all, flexible solutions for quick cabling are required for both small series as well as special purpose machines. This program comprises connectors and adapters – naturally with anti-vibration locking – in a straight or angled construction as well as in shielded versions. You can choose between screw-, clamp- and solder termination.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units / drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.