Install And Edit Impact Protection
Description
Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate
- Steel sheets and strips
- Secutex Gluing
- Screwing Secutex
- Secutex Sawing
Similar products from SPANSET SECUTEX GMBH
SPANSET SECUTEX GMBH
Germany
secutex Impact Protection for screwing This is our top seller – secutex buffer pad with a perforated plate. Easy and flexible to use and can be fixed reliably with the perforated plate as reinforcement. In this way, you will have a universal impact protection in a short time. Size and quantity of the drill holes depend on the substructure and must be specified on site. Selection of the screws We recommend screw sizes up to a maximum of 6mm, any larger dimension does not provide additional strength in combination with the castin perforated plate. As screws we recommend hexagon socket screws with low head according to DIN 7984 or DIN 6912. Not recommended Countersunk screws; inefficient transfer of the force into the impact protection, Bolts with hexagon head; the nut grips the bolt on the outside, the borehole must be much larger for this. Normal screws with hexagon socket; the screw head is significantly higher, the impact protection must be thicker
SPANSET SECUTEX GMBH
Germany
The secutex material may be sawn using a conventional band saw. The material will attempt to resist the cutting tool. Use as low a wedge angle as possible and, if necessary, adjust the cutting speed.
SPANSET SECUTEX GMBH
Germany
Impact protection in semicircular version secutex impact protection semicircles are suited for use with round loads that have been processed at the company. The inbound perforated plate prevents longitudinal and lateral straining of the material and allows for easy screwon applications.
