Measurements and Controls

FIFO disc magazine and control measurement device

The production of parts for machines and devices, the work of which requires very high precision and matching of each element, must undergo strict quality control. One of its elements is the dimensional compliance test, so important, for example, in the case of elements of bearings, gears or motors. Therefore, control and measurement instruments are an important part of the equipment of every company that carries out such serial production . These include, among others, coordinate machines with which CMM coordinate measurements are made . The precision of these machines' operation creates much greater possibilities than those offered by traditional control instruments - calipers, length gauges, micrometers, etc. The offer of the ZETEK company includes modern control and measuring instruments such as a coordinate measuring machine or a portable measuring arm. Thanks to its mobility, it allows you to take measurements anywhere, outside the laboratory or production hall

The most accurate digital torque tester with Fail Safe Engineering! - Greater accuracy and durability with simplicity and ease of operation - Floating decimal point, 6 digit display is easy to read - Accurate to ± 0.25% (indicated value) from 10% to 100% - Over capacity alert and tracking System 8 error proofs your error-proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration. System 8 has an LED that flashes red to alert you to the problem. It doesn’t stop until you reset the unit. The display also tells you the unit has been stretched over capacity. System 8 captures the over capacity data even if the memory was turned off. If memory was turned on and the unit is pulled over 120% capacity and a worker tries to erase the memory to stop the LED from flashing, the display tells the worker to “See Supervisor 120% Over Capacity”. No other torque tester on the market does this.

Torque range; 40 – 210 Nm  Extension bar 250mm  3x deep impact socket  17mm  19mm  21mm