NSBon—37 | 38
Optional Accessories
Description
Thermoelectric Coolers or Thermoelectric Assemblies are designed to remove heat around critical components within an electrical enclosure with IP66 / NEMA4 protection category. These is a thermoelectric module (thermoelectric air conditioner) using the Peltier effect. The thermoelectric modules create a temperature difference between the internal and ambient heat sinks. It makes internal air colder while heat is dissipating into the external environment. Fans help the transfer of heating from the heat sinks. The main advantages of Thermoelectric Cooler over conventional compressor are: it can be controlled electronically; it is easily reversible when the current is reversed; it can work in harsh environments: in high ambient temperatures or heavily polluted ambient air; in application with vibrations or strong accelerations. Thermoelectric Coolers should be used in regions with hot climates
- Control boxes - electric
- Nsbon Thermoelectric
- Assemblies Nsbon
- Nsbon Compressor
Product characteristics
- Operating voltage
- 24/ 48VDC; 220VAC
- Cooling capacity
- 100-900W
- Operating Temp
- -40°C to +70°C
- Dimensions
- depends on the model
- Weight
- depends on the model
- Protection category
- IP67
- Fitting position
- Variable
- Connection
- Terminal
- Axial fan
- Ball bearing
- Fan Air flow
- 110 CFM
Documents
Similar products
SCHNIEWINDT GMBH & CO. KG
Germany
CSN® EXPLOSIONPROOF SPACE HEATERS CSN® explosionproof space heaters are used for heating zone 1 and 2 hazardous areas. Standard devices are available in the common temperature classes T1 to T4; temperature classes T5 and T6 can be offered on request. The use of finned tubes for the CSN® explosionproof space heaters is the most economical solution for heat transfer in the field of electric heaters. By coiling corrugated helical fins on tubes of different alloys, we obtain extremely large tubes surfaces and, consequently, low temperatures on their surfaces. We use this interaction to produce explosionproof space heaters on a highquality level. CSN® explosionproof space heaters with coiled fins are intended for horizontal mounting and suitable for both wall and floor mounting (for permanent installation)
STRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
the economical alternative Replacement for STRATE 1DF2 and 2DF2 pump controllers suitable for connection to all STRATE fill level recording systems: contact-based or contactless the 2DF2 plus also handles dual level measurement: Sensor/pilot tube and sensor/contactor for outstanding operational reliability the current level and operating hours are always shown on the display
TELEDYNE ICM
Belgium
The CCU186 control unit for crawlers possesses a distinct advantage compared to existing products. In fact, all of the performances that are usually achieved with standard control units are now available in the crawler configuration. Automatic slow preheating, the progressive rise in voltage with each exposure, as well as a selection of set values are all included in the CCU186. As the CCU186 has been entirely fitted with industrial electronic components, it is perfectly suited to the often extreme conditions of automatic intra-tube control campaigns. GENERATORS All of the generators in the SITEX crawler range are automatically identified and controlled by the CCU186: the interchangeability is total and this can be instantly implemented on-site. Moreover, thanks to a conversion kit, these generators will operate in perfect sync with the SCU286 standard control unit.
Request for quotes
Create one request and get multiple quotes form verified suppliers.
- Only relevant suppliers
- Data privacy compliant
- 100% free