OKS 3571 – High-Temperature Chain Oil for Food Processing Technology Spray

Grease lubrication of plain and rolling bearings at high temperatures and high loads, e.g. on hot-air fans, converters, pouring ladles, sintering systems, conveyor systems subject to heat etc. Advantages and benefits Excellently suited for reducing friction and wear, protection against corrosion and impurities Maintenance of lubricating effect even at high temperatures and loads Highly effective due to selected combination of active ingredients for good corrosion protection properties, good resistance to ageing and excellent EP properties

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 341 For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.

For the long time- or for lifetime- lubrication of fast running roller and plain bearings as well as linear guides, threaded and ball screw spindles, small gears and similar components, exposed to high pressures and higher temperatures Advantages and benefits Good adhesive and good media resistant Good low-temperature behaviour, stress absorbing ability and smooth run at high speeds Good plastic compatibility The low start and running moment, especially at low temperatures, enables a high efficiency The good wear protection increases the life time of the part and makes sure a reliable functionFor best results clean the lubrication point with OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection media before initial filling. Fill the bearings in a way that all the functional surfaces are lubricated sufficiently. Slow moving bearings (DN-value < 50,000) should be filled completely. Fast running bearings (DN-value >400,000) should be filled

Lubrication of tooth flanks and sliding surfaces of machine elements of all types, for example sliding bearings, slideways, guides, etc. Run-in lubrication of heavily loaded tooth flanks and sliding surfaces Lubrication of jackscrews in the motor vehicle and train technology Cable lubrication Advantages and benefits High effectiveness thanks to graphite share Extremely low friction at highest load Increased operational reliability of moving parts due to run-in-supporting formation of sliding film Minimum consumption due to realisable thin-film lubrication Excellent pressure resistance Waterproof Free of bitumen, solvents, heavy metals and chlorine