S2638 - S2650 STAPLERS - FOR FIXING
Pneumatic staplers for staples 16 WC/S2 Wide Crown with wide shoulder
Description
STANLEY BOSTITCH PNEUMATIC STAPLERS MOD. S2638-2-E and S2650-2-E for special Wide Crown staples, with wide shoulder (mm. 25). New pneumatic staplers for fixing cardboard boxes to pallets and for packaging in which it is necessary to fix protective material (tar paper, polythene, polystyrene, etc.). Equipped with 2 start modes - sequential and contact that make them very versatile. The staplers are also equipped with the patented "DIAL-A-DEPTH" device which ensures precise control over the embedding depth of the stitch. All staplers are equipped with a shaped handle, a magnesium body, sequential safety, a belt hook, dust and splinter protection and a system for easy removal of the stitch. Available models: - S2638-2-E pneumatic stapler for staples with length from 13 to 38 mm - S2650-2-E pneumatic stapler for staples with length from 25 to 50 mm Also available in S2638/650-2-E BL models equipped with a long arm to fix the cardboard in the bottom of the case
- Stapling and nailing - machinery and equipment
- pneumatic stapler
- stitcher for fix cardboard
- pallets fixing stapler
Product characteristics
- Example model
- S2638-2-E
- Type of power supply
- Pneumatic
- Weight
- 2,40 kg
- Dimensions
- 362×236×78 mm
- Charger capacity (Max.)
- 140
- Operating pressure
- 5,5 - 8,3 bar
- Air consumption
- 1,4 l/cycle
- Noise
- 93,2 dB (A)
- Vibration / Uncertainty (m/s2)
- 2,2 m/s2
Similar products from FERPLAST SNC
FERPLAST SNC
Italy
The pneumatic stapler ROLL is employed for the sealing the top part of cardboard boxes. It is provided with a coil magazine. The number of staples the fastener can contain is therefore quite high (1,000 for coil) and work can be accomplished in a faster way. They are equipped with the stitch depth adjustment and use points with width mm. 35 and depth mm. 15-19-22. The stapler use AR1 type staples only, characterised by their inclined shape. The tool is available in three versions in order to be able to seal cartons of any width.
FERPLAST SNC
Italy
AIR BOXER pneumatic stapler for fast and efficient stitching. Used mainly for the closure of the upper part of the boxes. Pneumatic stapler models available in 5/8 - 3/4 - 7/8, for staples auburn mm. 35/15 - 35/19 - 35/22 in the finger. Equipped with a device for adjusting the depth of the stitching.
FERPLAST SNC
Italy
Pneumatic stapler for to sealing the top part of cardboard boxes. Available in 3 models for staples 35 mm. width and 15 - 19 - 22 mm lengths (1 single tool for each type of staple). It is possible to adjust the staple closure depth. Extremely solid for intensive work.
FERPLAST SNC
Italy
Pneumatic stapler for staples Series WS/16WC, with firing hammer, section 1.40 x 1.60 mm., width 22,2 mm., length from 15 to 38 mm. Special model with hammer firing. Normally, after each shot, you have to release the trigger to shoot another clip; in this case it is not necessary, so just hold down the trigger and the shot will be made as soon as the stapler will be in contact with a flat surface. Uses: Assembling of furniture and cabinets, construction of frames for doors and windows, wood interior trim, cornices, waterproofing and insulating homes, hardwood floors, vinyl siding and aluminum, attack with springs in upholstery, production of wooden signs, drawers, backs of boxes, grids. Both models, as an accessory, can be equipped with a long arm to fix the cardboard in the bottom of the case.