Spiral conveyor - Vertical conveying

AViTEQ Vibrating table can be used both for compression and also for loosening bulk material. Typical applications are compacting of e.g. concrete mixes or the unstick/knock out of molds. There are two different approaches: The load to be vibrated, is set loosly on the table or firmly clamped to the vibrating device. Advantages & benefits variable, can be used for different tasks easy to regulate with magnetic vibrator Construction Compact design, with attached magnetic vibrator/s or unbalanced motors below the tabletop. Selection The sizing depends on: bulk material, such as bulk density, particle shape and internal friction the properties of the container, such as height, stiffness and sidewall Key figures length: up to 4,000 mm width: up to 2,000 mm payloads: up to 3,000 kg drive: magnetic vibrator, unbalanced motor, exciter

AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item for item, with a pre-determined orientation and time. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment synchronized two-mass vibration system no influencing of the vibration characteristics through the weight of the parts being conveyed maintenance-free drive conformity with all EC Guideline which affect the drives also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages Construction and operation mode AViTEQ Parts conveyors are two-mass vibration systems, which are synchronized to be close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The arrangement of the simple leaf sprin

AViTEQ-Small part conveyor is used everywhere fine-grained bulk materials and not too unwieldy mass parts must be delivered, conveyed, dosed, added or assigned from storage tanks. AViTEQ has led the way in producing these devices and drives in Germany on a highest level standard. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment No influencing of the conveying speed with different loading of the user device (conduit, trough, rail). Conformity with all EC Guidelines which affect the drives available for explosion-endangered spaces (ATEX; 94/9/EG) available for 60 Hz power systems and other mains voltages Construction and operation mode Small-scale conveyor equipment is based on synchronized two-mass vibration systems which are tuned close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The vibration amplitude (double amplitude

AViTEQ-Strewing units are used wherever a small quantity of free-flowing material is fed to or distributed over belts, rolls or surfaces. They are executed as Strewing plates or Strewing covers. AViTEQ vibrating distributors are used primarily in the recycling, chemical and food industries. The distribution rate depends on the size of the distributor, the clearance, the load range and the conveying ability of the distributed material. The distribution rate is approx. 1 to 1,000 litres per metre of spread and per hour, depending on the distributed material and the setting. Advantages & benefits magnetic vibrator permits high distribution accuracy simple and continuous regulation of the delivery rate by varing the gap width and the load range of the magnetic vibrator simple cleaning foodstuff-approved, hygienic design Construction The main components are: vibrating distributors from various materials (e.g. stainless steel) driven by magnetic vibrators suspended by compound springs