Application The HMB Honing Rigs are designed for honing cylinder liners removed from the engine block with the corresponding mobile Hunger PHM Honing Machines. - Honing Rig Type HMB 340 is tailored to the Honing Machine Type HBM 340. - Honing Rig Type HMB 640 is tailored to the Honing Machine Type HBM 640. Features Rigid base structure including upright supporting tubes for mounting the mobile PHM Honing Machine. The liner to be honed is placed on top of a honing liquid reservoir which is slideably mounted on the base structure. The reservoir can be drawn out for ease of loading and unloading of the cylinder liner by means of a crane. An electric pump is provided to supply honing liquid to a spray nozzle. The spray nozzle is mounted on a magnetic base which can be attached to the frame tube to direct the honing liquid to the area to be honed.
Germany
Electric cylinders are self-locking. So they do not need energy when they stand still. This makes the electric cylinders to be an interesting alternative to pneumatic and hydraulic actuators. Powerful DC motors, signal lines, potentiometers and Hall-ICs for position indication, as well as integrated end switches uncomplicatedly serve for meeting the most frequent requirements.
Request for a quoteAustria
Vitrified and resin-bonded tools for honing and superfinishing Honing and superfinishing stones are made from conventional abrasives (aluminium oxide and silicon carbide) as standard. However, Tyrolit also produces these tools using superabrasives (diamond and CBN). Honing and superfinishing is used on components with especially high demands concerning the surface finish and geometry. The demands on the honing and superfinishing stones are also correspondingly high. Consistent quality Good stock removal Good surface finish
Request for a quoteTurkey
This #15 cutting dies measures 2″ (44 mm) and is intended to be used prior to installing our #15 – 2 inch curtain grommets to punch holes. Specifically used with spandex/lycra fabrics. Top shaft is 5/8” smooth. These dies sets are designed to be used with Micron M 3 fastener attaching machine and the MC 20 double cylinder fastener attaching machine. Each cutting dies comes with a white Teflon cutting board to protect the blade from dulling.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.