- Cement-based, high performance, elastic thin insulation plate adhesive mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. - High bonding strength - Ease of application SCOPE OF APPLICATION - Bonding of plates indoors and outdoors in buildings, - On surfaces such as concrete, plaster, screed brick
Austria
The corrugated board industry traditionally relies on corn starch and wheat starch. AGRANA corn and wheat starches are characterised by excellent adhesion and rapid initial tack, which is particularly important at high machine operating speeds.
Request for a quoteGermany
Working with the HB 950 is ideal if the hot-melt adhesive is applied from above. By hanging the hand gun on a balancer, you can work in a way that is gentle on the muscles and tendons. The safety and protection of the user are ensured by the insulation of the handle, which also does not transport any adhesive. A 1.2 mm bead nozzle is pre-assembled. The standard version has a PT100 temperature sensor, others are available on request.
Request for a quoteItaly
The label is inserted by the operator under the shaft which is located in front of the gluing cylinder which, with its continuous rotation, drag and applies a thin film of glue, handing the operator already ready to be applied. A special device allows the micrometric regulation of the glue, allowing a perfect gluing and the maximum cleanliness of the label. The EME gluing machines are made of stainless steel and brass, while the tray of glue is in ABS antacid. All parts in contact with the glue are interlocking and can be disassembled easily without any tools, making it quick and easy cleaning. USABLE GLUE: The gluing machines use a sticky compound consisting of powdered dextrin diluted in water. 400 grams of dextrin must be mixed with 600 ml of water. This is vegetable glue derived from potato starch.
Request for a quoteGermany
The ViscoDuo-VM 2-component dispenser is a valveless dosing system for static mixing based on the proven progressive cavity technology and thanks to its purely volumetric precise dosing principle, is ideally suited for high-precision dosing tasks. Built according to modular structure, a configuration of the 2-component dosing systems as well as maintenance and part exchange at module level is possible. The material components are mixed downstream of the mixing head only in the mixing tube to prevent material hardening in the system components of the mixing head. Your advantages: - repeatable dosing volume even with viscosity and density fluctuations - Processing of low to high viscosity materials with low to very high filler content - Dispenser and mixing head segments can be combined in size due to modularity - standard equipment with dead space-free integrated dosing pressure sensors for online process monitoring - simple assembly/disassembly of the components
Request for a quoteCreate one request and get multiple quotes form verified suppliers.