WALL BRAIDED PLASTER
It freezes quickly, speeding up the work.
Description
It provides high strength. It is easy to use. Time and material savings provides. It is economical CONSUMPTION AMOUNT Product kg / m2 Brick (8.5x19x19) 5,05 Brick (13.5x19x19) 9,39 Pumice Brick (10x39x19) 3,27 Pumice Brick (15x39x18) 4,81 Pumice Brick (20x39x19) 5,32 Pumice Brick (25x39x18) 7,55
- Bulk materials for construction
- Wall Braided
- Wall
- resistance
Product characteristics
- Physical Form
- Powder Plaster
- Water / Plaster Ratio
- 25 kg of gypsum in 10 liters of water
- Usage Period
- 60 minutes
- Freezing Time (After Application)
- 20 - 30 minutes
- Dry Unit Bulk Weight
- 900 - 1000 kg/m3
- Weight
- 25 kg + %2
- Fire Response
- A1 (According to TS EN 998-2)
- Compressive Strength
- > 8.0 N/mm2 (4x4x16 blocks)
- Its Standard
- TS EN 998 - 2
- Type
- Polypropylene Bag PP5
Similar products from KAYADERELI CONSTRUCTION
KAYADERELI CONSTRUCTION
Turkey
It is a mold plaster used in shaping ceramics and ceramics.
KAYADERELI CONSTRUCTION
Turkey
INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.
KAYADERELI CONSTRUCTION
Turkey
Repair and renovation application makes it practical. High addressability has.
KAYADERELI CONSTRUCTION
Turkey
Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.