Mobile. Integrated 60 l tank, 5 l concentrate tank, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Water volume 1,8 l /m. Spray lance with fixed 5 m hose.
Turkey
DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.
Request for a quoteTurkey
Flowing the dry cleaning of wheat, it is used for the humidity of wheat with a little consumption of water and time. At the same time, the wheat is unshelled also because of the two rotor, which turns with high speed.It can add up to 7% of water in a single flow-through.
Request for a quoteTurkey
The parts to be washed are placed on stainless steel rotative basket and are washed with water mixted with degreaser under high pressure. Washing is done in order to clean oil, sawdust, dirt and wastes on dirty surfaces from different angles by means of time-adjusted pressurized water nozzles according to the part structure and pollution rate. By filtering the water with the recirculation system, the machine is designed to wash parts with minimum consumption of water, detergent, electricity and time.
Request for a quoteGermany
With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.