United Kingdom
Distributor
United Kingdom
Stocked steel grades: RAEX 400, RAEX 500, BRINAR 400, AR400, 20MnCr6-5. RAEX 400360-440HB3mm - 100mm+ RAEX 500450-540HB6mm - 50mm RAEX STEELS RAEX is a hot rolled hardened steel grade with excellent hardness and strength properties and is resistant to abrasion and extreme surface pressure. RAEX 400 extends the lifespan of machinery, decreases the impacts of wear in structural components and saves costs. Thanks to its high strength properties, RAEX allows innovative and environmentally sound product development. RAEX is easy to weld, cut and has reasonably good formability. TYPICAL APPLICATIONS: Buckets and cutting edges of earth-moving machines, wearing parts of mining machines, wearing parts of concrete mixing plants and wood processing machines, platform structures, feeders and funnels. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
United Kingdom
Stocked steel grades: CORTEN, COR-TEN A, COR-TEN B, S355J2WP+N, S355J2W+N, S355JOWP, S355JOW, S355J2W, PATINAX, ASTM A242, 1.8946, 1.8965. Anticorrosive weather resistant steel with increased atmospheric resistance by formation of a protecting oxidation layer. Unprotected usage (no painting) possible depending on environmental conditions. TYPICAL APPLICATIONS: Structures, architecture, sculptures (Angel of the North), cladding, landscaping, chimneys, bridges, water pipes, fans, exhaust systems, vehicles and equipment constructions. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
United Kingdom
Stocked steel grades: S690QL, S690QL1, Optim 700 MC, Strenx, 700MCD, Dillimax 690, S700MC, RQT, Supralsim 690, Maxil 690. High strength structural steel is dedicated for structure, increases service load and enables weight savings due to a reduction in plate thickness and therefore a reduction in material, processing and running costs. TYPICAL APPLICATIONS: Heavy road vehicles, cranes construction, structural steelworks, pressure vessels, power plants, mining equipment etc. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
United Kingdom
Stocked steel grades: 12/14% Manganese, X120 Mn12, X120 Mn13, Creusabro M, ASTM A128 Grade B2, DIN W1.3401. A high manganese, fully austenitic, quench annealed, non-magnetic, work hardening steel with an exceptionally high level of wear resistance when subjected to work hardening by shock or high impact pressure in service. The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility. TYPICAL APPLICATIONS: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide, shredder plates, shovel buckets, bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. Guiding and shifting plates, scraps container, liner of shot blasting unit, wear liner, shot blasting equipment. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
A J Marshall (Special Steels) Ltd are steel stockholders of abrasion resistant, high strength, CORTEN weather resistant and work hardening manganese steel plates, sheets and profiles. Stocked steel grades: RAEX 400, RAEX 500, BRINAR 400, AR400, S690QL/QL1, Optim 700 MC, Strenx, Dillimax 690, S700 MC, CORTEN weather resistant and 12-14% Manganese work-hardening steel. When dealing with abrasion resistant, high strength, weather resistant and work hardening steels you cannot afford to take chances, it pays to trust a specialist. Since 1980 A J Marshall has supplied high quality plates, sheets and profiles to customers both throughout the UK and worldwide. With the UK's largest quenched and tempered steel plate size range, 3mm-200mm thick, 99% of all enquiries can be covered from stock. A choice of full plates, cut to length part plates or profiles. Also available if required - drilling, machining and bending services, so finished products such as bucket lips, crusher spares and dump truck reliner kits can be delivered straight to site. We have the technical back up of some of the World's largest mills, so we can find an effective solution to even the most exceptional and complicated applications. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Delivery within 48 hours (Britain), within 72 hours (Ireland) and exports worldwide direct from ourselves.
Distributor
Unit 89 Marston Moor Business Park
Rudgate, tockwith
YO26 7QF York - United Kingdom
United Arab Emirates
DANA STEEL is the leading manufacturer & exporter of high quality Hot Dip Galvanized Steel Coils & Sheets ( GI Coils & Sheets) as per International Standards & Specifications. Below is the Chart of our Continuous Galvanizing Line – CGL#1’s Process Capabilities,which shows the thickness,width,weight ranges and different finishes of Galvanized Coils,Sheets & Slits which are manufactured in our factory in Dubai UAE. Product Type & Applicable Specifications of Galvanized(GI) Steel Coils & Sheets DescriptionGALVANIZED STEEL SpecificationASTM A 653/A 653M – 18 CS Type A,B,C FS Type A,B DDS Type A,B SS Grade 33, 37,40, 50,55,80 EN 10346 :2015 which supersedes EN 10327 : 2004 DX51D, DX52D , DX53D EN 10346 :2015 which supersedes EN 10326 : 2004 S220GD, S250GD, S280GD,S320GD, S350GD, S550GD JIS G 3302 -2010 SGCC, SGCD1, SGCD2, SGC – 340, 400, 440, 490, 570 All our products are PROUDLY MADE IN UAE and exported to more than 60 countries across Africa & America
Request for a quoteSouth Korea
<Product Description> All things are standarded and customer can chose just folling its own needs without limitation in use of non commercial sizes. Our raw materials are used only domestic produced for the best guarantee in terms of quality and fair-play even for environmental. In more then 20years of activity .we have been producing a high quality steel strips for different industrial and technical purposed gaining experience to get best results in each market. All processes are done on most modern hardening and tempering facility lines. <Our Company> SAMSUNGSTS is leading manufacturer which is specialized in cold rolled, hardened tempered high carbon steel strip & alloy steel strip & stainlesss steel strip coil & Brush cutter blade & Meat bandsaw blade & Slice bread blade. we are supplying materials 17countries(Janpan, USA, Germany, Sweden, Italy, UK, Rumania, India, Indonesia, Singapore, Taiwan, China) with competitive price and best quality.
Request for a quoteSpain
TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.
Request for a quoteSpain
TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.