ALLMATIC basic 125

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.

Automatic clamping takes place over disc springs, which are adjustable in the pre-loading and are solved pneumatically to the workpiece change. Manual clamping is made by a knurled knob on the opposite side of the collet. Due to the integration into the existing through-hole of the rotary table, the rotary table with the clamping system remains very compactly. Compact High run-out accuracy Easy to operate Retrofit possible

Bolt clamp with rubber inlay

Paper Unwinder with a mechanical drag brake and conical clamping system, available in different sizes and versions for all types of coil reels and for all material widths Paper Recoiler, for all types of coil reels and for all material widths, with air motor or with electromotor