Germany
Manufacturer/ Producer
Germany
The hydraulic system of the MACE served the control of the cutting axis at the manipulation systems of the Water Abrasive Suspension (WAS) cutting unit MACE. For guaranteeing the safety distance - up to 500 meter - a control panel is included for the operator which controls the motion axis and the cutting speed.
Request for a quoteGermany
The base fuse manipulator was developed for cutting SAP, MC, GP and AP bombs. After it is applied to the base of the bomb, the water abrasive jet cuts out the detonator. Alternatively, the manipulator can be configured to cut away the entire bomb base together with the detonator.
Request for a quoteGermany
Device for remote controlled handling of a cutting nozzle by Water Abrasive Suspension cutting, suitable for cutting of three-dimensional outlines.
Request for a quoteGermany
For the abandonment of Offshore structures special legal requirements apply. Tubes have to be deconstructed under the seabed. This requires special technologies. Our Downhole Cutting Heads (DCHs) can be inserted into tubes and casings over an umbilical from the working platform. Arriving at the destination they clamp in the tubes and perform a 360 degrees cut which severs the tube underneath the seabed. The DCH is pulled out and afterwards the pulling of the tube is possible. Cuttings can be performed up to 150 m (500 ft) deep and pipe sizes between 7” and 72” diameter, whereby the wall thickness can be up to 20” thick. For every requirement we offer the appropriate DCH. By extensions nearly every kind of pipe/tubing/casing can be cut.
Request for a quoteGermany
AMU - Abrasive Mixing Units higher 700 bar. The AMU series was standardised for various industrial application ranges. Amongst these are the decommissioning and maintenance of offshore structures and plant in the petrochemical and nuclear technology industries. Also special applications, in the wind power industry or for structural or civil engineering are not uncommon. The unit designation always refers to the maximum working pressure and the gross capacity of the pressure vessel. In combination with a conventional high-pressure pump, the various pressure levels and nozzle diameters can be individually adjusted to the task in hand. Our cutting devices and equipment help to control the cutting processes with our water jet cutting systems (AMU higher 700 bar) from a large distance.
Request for a quoteGermany
Facing new manufacturing challenges? Want to be quicker and more precise than your competitors? Then you need ConSus. The ConSus system is an Abrasive Mixing Unit (AMU) in which abrasive is added continuously to the pressurized water flow with the worldwide patented lock method. High capacity and low pressure have been unachievable in water jet cutting until now. That’s exactly what the Water Abrasive Suspension (WAS) cutting method from ANT delivers. Tests prove: The ANT suspension jet cuts two to three times faster than conventional water jet cutting methods and at less than half the pressure. The reason for this is the composition of the water jet - a suspension made of water and an abrasive, which is pressurised without air before being squeezed out of the nozzle. The omission of air allows the jet to cut much more efficiently. ConSus combines all of these benefits in a single unit, which can be integrated into any existing water jet cutting system.
Request for a quoteGermany
Mobile water jet cutting unit particularly suited for Defusing large-caliber fund munitions EOD (Explosive Ordnance Disposal) & IEDD (Improvised Explosive Device Disposal). Environmental exposure over the time has chemical and/or physical effects on ammunition & often leads to a critical in-situ situation of the UXO. Conventional Render Safe Procedure (RSP) is very often not feasible without contacting or shifting the UXO and therefore is considered as not secure. In such situations repeatedly it came to severe accidents with death tolls. Hence safety of transport to carry-off for final removal is also not given.Therefore in such cases blasting the UXO is so far used as a final RSP causing partly heavy collateral damages. This unit allows to remove or deactivate the fuse remotely, risk-free & safe by using the WAS Technology & specially designed manipulation systems. The deployment of this technology around the globe has become state of the art today and is an accepted RSP world-wide
Request for a quoteGermany
The chain manipulation system is the system of choice for rotationally symmetrical geometries, especially pipes. The chain enables flexible application on external diameters between 400 and 1500 mm.
Request for a quoteGermany
The mini MACE is suited for, for example, the cutting and opening of pipe bombs, hand grenades or potentially hazardous objects such as unconventional explosive devices in the form of fire extinguishers and cases. mini MACE combines an abrasive mixing unit and a high-pressure pump in a single casing. The working pressure of the unit, which is driven by an internal combustion engine, is 6525 PSI (450 bar). The mini MACE was developed as a mobile penetration and cutting tool. An autarkic complete system equipped with internal combustion engine, abrasive mixing unit (AMU) and high pressure pump for accessing and deactivating IEDD (Improvised Explosive Device Disposal). It could be also used in the industrial sector for e.g. opening tanks.
Request for a quoteGermany
Device for remote controlled handling of a cutting nozzle by WAS cutting, suitable for cutting of two-dimensional outlines. This cutting table has been designed for two-dimensional contours. One of its major plus points is its extremely low weight with the associated ease of handling and mobility.
Request for a quoteManufacturer/ Producer
Hinter Den Kirschkaten 32
23560 Lübeck - Germany
Turkey
Engines for combined heat and power plants are operated with different fuels, including hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels. In an exhaust gas heat exchanger, the hot exhaust gas from the CHP engines or CHP gas turbines is cooled, in the process heating water, a water-glycol mixture or thermal oil. This thermal energy can be used in a local or district heating system or for other industrial purposes.
Request for a quoteTurkey
Silencers/Mufflers; diesel and gas engine exhaust noise is designed based on required target noise levels and current pressure drop. In addition to the standard silencers for stationary engines, special silencers are designed and manufactured according to customer specifications. In addition to reducing exhaust noise, extremely compact designs are made with the available space in mind.
Request for a quoteFrance
Wire spark erosion, laser micro-cutting, micro-milling and micro-drilling STEEC is also involved, both as a subcontractor to numerous SMEs and agencies in the metallurgy and mechanical engineering sectors which very often engage in subcontracting activities themselves. STEEC enables these players to respond to invitations to tender that involve meeting precision micro-machining requirements for which they are not equipped. The wide variety of precision micro-machining operations which STEEC offers is highly beneficial to these SMEs and agencies, which are able to offer a comprehensive service in micro spark erosion, laser micro-cutting, micro-drilling and milling.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.