AR8031-AL1B Qualcomm
Interface - Drivers, Receivers, Transceivers
Description
The Qualcomm Interface AR8031-AL1B is a surface mount Ethernet transceiver designed for use in a wide range of applications. It is capable of operating over a temperature range of -40°C to 85°C and is powered by a 3.3V supply. The AR8031-AL1B is compliant with the IEEE 802.3 standard and supports 10/100/1000 Mbps data rates. Features: • Compliant with IEEE 802.3 standard • Supports 10/100/1000 Mbps data rates • Low power consumption • Surface mount design • Operating temperature range of -40°C to 85°C • Powered by a 3.3V supply Applications: The Qualcomm Interface AR8031-AL1B is suitable for a wide range of applications, including: • Industrial automation • Automotive • Networking • Telecommunications • Medical • Consumer electronics
- Electrical & Electronic Components
- Qualcomm
- Ethernet Transceiver
- Wfqfn
Product characteristics
- Kynix Part #
- KY32-AR8031-AL1B
- Manufacturer Part #
- AR8031-AL1B
- Product Category
- Interface - Drivers, Receivers, Transceivers
- Manufacturer
- Qualcomm
- Description
- Surface Mount -40°C ~ 85°C Ethernet Transceiver 3.3V
- Package
- 48-WFQFN Exposed Pad
- Quantity
- 17598 PCS
- Lead Free Status / RoHS Status
- Lead free / RoHS Compliant
- Lead Time
- 3(168 Hours)
Similar products from KYNIX SEMICONDUCTOR HONG KONG LIMITED
KYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver • RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core • Jumbo frame support up to 16KB • 125MHz reference clock output
KYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The MAXIM Interface - Drivers, Receivers, Transceivers MAX232CWE is a 16-SOIC package device that supports the RS232 protocol. It has two drivers and two receivers, and is packaged in a tube for easy installation. The device is designed for surface mount applications and has a 16-SOIC package case with a width of 0.295" (7.50mm). It operates on a voltage supply of 4.5 V to 5.5 V. This device is ideal for applications such as serial communication, data transfer, and other communication systems.
KYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The MAX3221EAE+ is a high-performance, low-power, surface-mount transceiver designed for RS232 communication. It is capable of transmitting and receiving data at speeds up to 235Kbps. The device is designed to operate over a wide temperature range of -40°C to 85°C, making it suitable for a variety of applications. The MAX3221EAE+ features a 16-SSOP package and is powered by a 3V to 5.5V supply voltage. It is designed to provide reliable and robust communication between two devices. The device is also designed to reduce EMI/RFI emissions, making it suitable for use in a variety of environments. The MAX3221EAE+ is an ideal solution for applications requiring reliable and robust RS232 communication.
KYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The MAX3232ECPWR is a low-power transceiver for RS232 communication from Texas Instruments. It is a surface mount device with a temperature range of 0°C to 70°C. It has a data rate of up to 250kbps and is available in a 16-TSSOP package. It operates from a supply voltage of 3V to 5.5V.