AudioJoG Pro 3
Description
Features: There are 2 rows of 4 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. Connectors: 3pin XLR 1/4" Stereo Jack RCA Phono sockets Memory: There are 4 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then AudioJoG Pro 3 automatically scans all the connections and compares against information held with just one press of the test button. MEMORY works in single and double ended test modes. INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found. ioJoG tester
- Audio and video accessories
- Audiojog
- Led Audiojog
Similar products from CABLEJOG LTD
CABLEJOG LTD
United Kingdom
19" 3u rack mount fan in adapter for AudioJoG Rack 19 fan out cable testers. Fitted with 6 ABB C Form 16 A sockets. Supplied with connecting ribbon cable assembly.
CABLEJOG LTD
United Kingdom
19" 3u rack mount fan in adapter for AudioJoG Rack 19 fan in cable testers. Fitted with 6 ABB C Form 16 A plugs. Supplied with connecting ribbon cable assembly.
CABLEJOG LTD
United Kingdom
AudioJoG Rack 19 powerCON fan out is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON outlet (grey) fan out or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON grey outlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results. Preprogrammed cable types.
CABLEJOG LTD
United Kingdom
Features: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: PowerCON in and out 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2.5mm Jack, stereo or mono 2 & 4 Pole Speakon MINI DIN 4 Pole DIN 3, 5 (180o) Pole RCA Phono BNC50/75W / HD SDI RJ45, Ethercon USB A & B Mini & Micro USB 4mmRed & Black Memory: There are 6 LED's indicating the state of the MEMORY. If the MEMORY LED is on, then AudioJoG Pro 8 mobile automaticallyscans all the connections and compares against information held with just onepress of the test button.