AudioJoG Pro 5
Description
Features: There are 2 rows of 6 LED's corresponding to each ofthe possible connector pins and one for the screen (or ground) connection. Aseach pin is activated, the LED's indicate all connections associated with thatpin, so that short, open and crossed circuits can be easily found. The LED'salso show the possibility of high resistance or leakage connections. Connectors: 3 Pole XLR Maleand Female 5 Pole XLR Maleand Female 6.35mm Jack,stereo or mono Single or Twin4.4mm Bantam, stereo or mono 3.5mm Jack,stereo or mono 2/4 PoleSpeakon DIN 180o 3 & 5 Pole RCA Phono BNC 50/75W /HD SDI Memory: There are 3 LED's indicating the state of the MEMORYoption. If the MEMORY LED is on, then AudioJoG Pro 5 automaticallyscans all the connections and compares against information held with just onepress of the test button. MEMORY works in singleand double ended test modes. INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found.
- Audio and video accessories
- Audio Pro
- Audiojog Tester
Similar products from CABLEJOG LTD
CABLEJOG LTD
United Kingdom
19" 3u rack mount fan in adapter for AudioJoG Rack 19 fan out cable testers. Fitted with 6 ABB C Form 16 A sockets. Supplied with connecting ribbon cable assembly.
CABLEJOG LTD
United Kingdom
AudioJoG Pro 8, AudioJoG Pro8 mobile & AudioJoG Pro8 power 9V mains power supply kit. Comes with UK, European & USA adaptors and replacement battery cover with DC input socket.
CABLEJOG LTD
United Kingdom
AudioJoG Rack 19 powerCON True 1 fan in is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON True 1 inlet fan in or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON True 1 inlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results.
CABLEJOG LTD
United Kingdom
AudioJoG Rack 19 powerCON fan in is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON inlet (blue) fan in or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON blue inlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results.