Bossong technology
Description
Over the last recent years a greater and greater attention to the existing building heritage and to the activities aimed to the preservation of both buildings with high architectural value and those belonging to the category of traditional buildings has been developed. Among the restoring interventions of existing buildings there are often strengthening works, in which one provides the embedment of metal anchors into masonry or wood stitching of cracks, bonding between reinforcement metal anchors and the existing structures, tierod or reinforcement ring put to contain the action of pushing elements such as arches and vaults, connection between floor slabs and outside masonry walls, embedding of anchorages inside the walls in order to increase their resistance and the global behaviour of structures also for seismic upgrading.
- Insulation - injection materials
- Metal anchors
- stainless steel
- Injection operations
Documents
Similar products from BOSSONG SPA
BOSSONG SPA
Italy
Bossong injected anchors with sock and Presstec grout with RBOS bars. Injected multibars anchors with sock and Presstec grout with RBOS bars. Stainless steel reinforced bars. On demand carbon steel bars.
BOSSONG SPA
Italy
Bossong injected anchors with sock and Presstec grout with TBOS bars. Stainless steel threaded bars. Couplers, turnbuckers, nuts, standard end and architectural end plates.
BOSSONG SPA
Italy
Bossong injected anchors with sock and Presstec grout with GBOS bars. Stainless steel bars fully threated. Stainless steel smooth bars. Couplers, turnbuckers, nuts, standard end and architectural end plates.
BOSSONG SPA
Italy
Highadhesion epoxy resin for heavyduty fastenings for use in different base materials as concrete, solid masonry and wood. This Bossong resin can be used also with wet concrete and flooded hole including underwater fixing (reduction of the recommended loads of 20%). Suitable for electrically insulated fastening. It has longterm resistance to hydrolysis. Excellent for applications with reinforced bars. Thixotropic consistency. The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material. It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer. It can also be used for repair and refilling. SERVICE TEMPERATURE RANGE Between 40°C /+ 40°C with T°max long period of 24°C and 40°C/+80°C with T°max long period of 50°C (ambient temperature after installation).