CERAM 235 Baltospot
Portable generators
Description
When you need a unit that can perform standard thicknesses inspections as well as occasionally heavy walled ones, the CERAM 235 is the perfect compromise. Offering a maximum of 235 kV and 5 mA, the CERAM 235 combines all technological advantages of its big brother in the CERAM series and gives the flexibility of a unit smaller in size. No compromises have been made to component selection or cooling, the unit is able to run on a 100% duty cycle thanks to its purposely designed tubehead and driving electronics. This unit has to be combined to one of the two available type of control units (CF2000 or Hand X), with very lightweight new generation of cables..
- Generator
- portable generators
Product characteristics
- Tube current range
- mA 0,1 - 5
- Maximum anode power dissipation
- Watt 1175
- Beam angle
- ° 40°
- Focal spot size (IEC336)
- mm 2 x 2
- Steel penetration at max (*)
- mm 43
- Max recommended temp.
- °C 50
- Temperature switch
- °C 70
- Inherent fi ltration
- mm (Be) 1
- Anode cooling type
- Air
- Duty cycle
- % 100
- Mains
- V 180 - 260
- Weight (without rings)
- Kg 27
- Tubehead
- Ceramic
- Control unit
- CF2000 or Hand-X
Documents
Similar products from BALTEAU NON DESTRUCTIVE TESTING
BALTEAU NON DESTRUCTIVE TESTING
Belgium
A generator needs a reliable, flexible and stable power supply for working. With a Crawler, this power supply is brought by a battery set embarked in the mechanical carrier. The CF3 is the power converter (Chopper) between the batteries and the Generator. However the CF3 is also an intelligent regulator which will be able to give out of your batteries the most stable and constant output all along your exposures. Our Chopper CF3 is the result of the technology evolution that is applicable in electronics nowadays. Based on the well known CF1 that has equipped several generations of Crawlers around the globe, this new model has also been developed to be used with the major brands of Crawler Manufactures. The CF3 features a separate set up and remote control device (CFR) which allows you to manage parameters and preheating functions.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarantees image quality consistency all along the exposure time. This specific process, is also improving the operating possibilities of the battery pack. Indeed much more exposures can be taken. This process improves the battery lifetime thanks to a better management of discharge cycles.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages within the range of 72 to 130 V can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarentees image quality consistency all along the exposure time. This specific process is also improving not only tje operating possibilities of the battery pack, thus much more exposures can be taken before the batteries are discharged, but also it improves the battery lifetime by a better management of discharge cycles.
BALTEAU NON DESTRUCTIVE TESTING
Belgium
The generator is driven by an electronic circuit board (the power components are cooled by forced air). Components can be readily installed in the crawler body and connected to its general circuitry. Any DC voltages within the range of 72 to 130v can be selected and applied to the generator. An exclusive feature allows generator to operate at constant kV and mA no matter of the battery cycles. This feature ensures a stable dose output and guarantees image quality consistency all along the exposure time. This specific process, is also improving not only the operating possibilities of the battery pack, thus much more exposures can be taken before the batteries are discharged, but also it improves the battery lifetime by a better management of discharge cycles.