This GlobeCore mobile oil processing unit is designed for degassing, removal of solids and heating of oil for power transformers with voltage up to 1,150 kV. The unit can be used to: (1) heat electrical systems that contain insulating oil with hot oil; (2) for vacuum drying of transformers and (3) for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power transformers and other oil filled electrical equipment. The unit is not certified for use in and around explosive gases, toxic gases or other aggressive environments. When indoors or other enclosed spaces, exhaust gases must be vented to the outside through hoses or pipelines. no need to use adsorbents to dehydrate transformer oil; operation of equipment causes no air pollution or waste requiring storage and disposal; easy to operate and maintain; maximum oil specifications even after one treatment cycle; low power consumption; low noise level;
Turkey
The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. Using coalescent filter, it has the superior filtering capability. PROPERTIES: It has a working pressure of 130 bars, Filtration with coalescent filter, SAE or ODS connection options
Request for a quoteGermany
The PFOS oil separator as an alternative to oil skimmer The Profluid oil separator clean the cooling water of cutting machines in approx. 2 hours. Due to their well thought-out design they are very easy to operate and maintain. The oil separator separates oil and cooling water by means of a porous filter. This porous filter has an effective resolution and works without clogging. By the difference of the specific weight the oil drives the surface. The result is an easy separation and removal of the oil. Regular cleaning and separation of oil and emulsion prevents health problems for your employees. Another positive aspect is the increase in the service life of the cooling water. Cooling channels can become clogged due to contamination of the cooling water. This can be prevented by cleaning the cooling water. Excessive wear of machine parts and corrosion on workpieces can also be the result of contaminated cooling water.
Request for a quoteGermany
The point bonded polyester fleece Cora®Dot is ideally suited for filtration of rolling oil by using of precoating agents.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.