CableJoG 12V mains power supply

AudioJoG Rack 19 powerCON fan in is a cable tester to test standard 18 or 19 wire Socpex cables as well as Socapex plug to 6 powerCON inlet (blue) fan in or spider. Connectors fitted: Socapex 19 pin plug Socapex 19 pin socket 6 x powerCON blue inlet Test Modes: In normal operation connect both or all ends of the cable. Press the test button. The tester will identify the type of connection and if there are any opens, shorts or crossed wires. Memory. If the connected cable could not be identified then the found connections will be displayed one by one. After which these details can be stored and used to test similar cables. Specification: 19" 3u rack mount W 483mm H 132mm D 60mm. Easy to use one button operation. Test time less than 1 second. Detects Opens, Shorts and Crossed wires. 2 x 16 character OLED display for test results.

Connectors: Standard 0.1" or 2.54mm x 2.54mm pitch headers 64way 60way 50way 40way 34way 26way 20way 16way 14way 10way Test Modes: MemoryOFF, just plug the cable in and press the test button. If the last connectionfound matches a standard connector pin count then the cable passes, otherwisethe cable has failed with either a short or open circuit. Memory ON, test the cable against aspecial cable held in memory. All 64 pins are checked. Specification: Continuity (endto end) less than 4.7K ohms. Short Circuits (end to end) and betweenconnected pins, less than 4.7K ohms. OpenCircuits (end to end) and between connected pins, greater than 10K ohms. Lessthan 1 second test time. Minimumdistance between connectors of the same size only 130mm. Non-volatilememory feature. L 290mm W143mm D 35mm.

Features: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: 3, 4, 5, 6 & 7 Pole XLR Male & Female DIN 3, 5 (180o) & 8 Pole MINI DIN 4 Pole BNC 50/75W / HD SDI RJ45, Ethercon USB A & B Memory: There are 6 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then LightingJoG Rack 8automatically scans all the connections and compares against information heldwith just one press of the test button. MEMORY works in singleand double ended test modes.. INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found.

Feature: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono Single or Twin 4.4mm Bantam, stereo or mono 2.5mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2,4 & 8 Pole Speakon DIN 3, 5 (180o) & 8 Pole MINI DIN 4 Pole RCA Phono BNC 50/75W / HD SDI RJ45, Ethercon USB A & B 4mm (x2) "banana” Memory: There are 6 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then AudioJoG Rack 8automatically scans all the connections and compares against information heldwith just one press of the test button.