Two kinds of fuel are changed in the engine repeatedly without mixing. Thus also small differences in the specific consumption, the emissions and further values measured at the engine which are influenced by the fuel will be clearly visible. The engine is charged by a coupled braking dynamometer (engine test bed). At the test bed, different load conditions may be adjusted. The reproducibility of the experiments is secured by the speed stabilisation and the automatic gravimetric determination of the specific fuel consumption of the MP Computer. Example of application: Testing the efficiency of fuel additives or of other kinds of fuel pretreatment.
China
Application SMT, BGA, CSP, Flip Chip, LED Detection, Semiconductor, Packaging components, Battery Industry, Electronic components, Automotive parts, Photo-voltaic, Aluminium Die-casting, Moulding Plastic. Ceramics, other special industries.
Request for a quoteGermany
Digital Torque Gauge with pull-out LC Display High precision handheld digital gauge with integrated LC display to measure small torque. Ideal for torque measurement like rotating torque, click torque of precision machinery, electronic devices, and various assembly components. The digital display simply slides out of the housing and is attached with a curly cord. Use the optional testing stand to secure the gauge while testing or add fixture to secure your test piece. Combined with Measurement Stand (#808), it can be fixed to use as torque screwdriver checker, et al. ATGE-G series devices are manufactured for the global market and offer a selection of SI, metric and American units of measurement. Equipped with SI calibration as standard, optionally available with calibration in anglo-saxon (ozf·in) or in metric (gf·cm) units.
Request for a quoteGermany
A prerequisite for the adhesion of an adhesive or coating to a surface is wetting. For wetting to take place, the surface energy of the substrate must be greater than that of the coating. In particular, very many plastics have a very small surface energy and are correspondingly difficult to bond. Often the aim of a plasma treatment is to make a surface wettable and bondable. The wettability can easily be tested with test inks. Diener electronic supplies a test ink set with 8 liquids with surface tensions between 30 and 73 (105) mN/m suitable for most practical applications. There is also a set of 23 test inks, with additional gradations between 30 and 73 (105) mN/m.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.