Condensate accumulator COA

It is not our goal to simply sell our product to the customer. It is our goal to define the correct solution for our customer's individual application requirements and to offer support throughout the entire specification process with our technical competence, to give the customer all the information required in order to decide, with good conscience, for ennox. Our engineers have accumulated many years international experience and are true professionals in biogas technology. We are happy to offer our engineering expertise during design and specification right through to installation and after-sales support. Further to the implementation of the project we are also at your side! During the last decades the servicing of machines, systems and components has come more into focus. The quality of our customer service associated with the purchase of an ennox system is just as important for our customers as the performance or the price. We offer service or maintenance agreements for...

Fine sediment and foam particles in the saturated biogas originating directly from the digestion can make it s way into the pipework system. In order to eliminate sediment accumulation in the pipework an ennox sediment trap can be used. The trap is installed after the reactor directly in the pipework. With a special nozzle at the trap inlet the saturated and contaminated gas is set into a spiral motion. The particulate matter separates from the gas on the side walls and passed into the collection point with the extracted water vapour. Discharge is carried out with a siphon. Additionally a spray and control connection can also be installed.

Biogas can contain large quantities of poisonous hydrogen sulphide depending upon the fermentation process and which input materials are used. This gas can cause permanent damage to gas engines or other consumers of the biogas. The majority of the hydrogen sulphide gas can be effectively removed by using an ennox active carbon filter ACF. In addition, the active carbon filter can be used for the removal of damaging siloxane from the biogas, furthermore for the neutralization of unpleasant odours in outgoing air and tanks.

Biogas, sewage gas and landfill gas contains not only water vapour but also a whole host of additional impurities such as hydrogen sulphide, NH3 and siloxane, which, when processed in the utilization system can not only lead to a reduction in efficiency, but also result in damage to the system. The dehumidification of the gas before processing is a basic preliminary requirement in order to permit an efficient usage of the biogas and an investment in the sustainability of the utilization system. With the ennox gas chill dryer the gas to be processed is passed through a heat exchanger where the cooled gas can expel any moisture which drips and is collected as condensate. According to the technical requirements of the installation a post-warming or an economical and ecological energy recovery system can be implemented into the system.