Control Cables

To be used as halogen free, flame retardant and environmentally power, control and connecting cable in electrical facilities, in fire vulnerable areas and facilities with high concentration of people and proberty values, for fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry an humid rooms. Outdoor use only with UV-protection, no laying underground. The copper braided screening prevents electrical and magnetic interference of the control cable with the environment and of the environment with the internal cable cores.c

In 1959, ÖLFLEX® was the very first control cable to be designed with colour-coded wires and was at the same time the first branded cable in the world. Today, ÖLFLEX® connecting and control cables are some of the most widely used in the world, and for good reason. Properties: — Flexible, almost entirely oil-resistant and universally applicable. — Fulfills the most demanding requirements for electrical and mechanical properties. — Comprehensive range for all environmental conditions, including wet/dry, EMC, outside/inside, various temperature ranges, etc. — Suitable for fixed connection or energy supply chains. — Also halogen-free and available with international licences.

Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).

Belit Elektronik makes wire harnesses in various configurations, density and according to demands. 100% control of cable assemblies are done with various test equipments as a result preventing future damages and loss of time. In line with customer demands, Belit Elektronik can use one or more of materials together that hold cables such as cable ties, tubing, heat shrink tubing, cloth tape together.