Copper
Description
or the service of installation technicians, eid exercises strict quality control on the copper, coils, bars, REFNET® refrigerant tubing. Here are a few explanations: THE TECHNICAL PROBLEM Technical performance of the air conditioning and refrigeration systems with the new refrigerant fluids (R410A, R32, etc.) is considerably reduced by the effect of the residual mineral oil used in the manufacture of ACR tubes ACR, used for heat exchangers and refrigerant tubing. THE SOLUTION Installing SUPERCLEAN tubes guarantees less residue inside the tubes. The internal residue ratio, defined as 0.1 mg/m, is only one sixtieth of that of conventional tubes. This means that there is no need for future cleaning of the exchangers and tubing, thus increasing the performance of the air conditioning and refrigeration systems. Our copper is manufactured using Grade A cathodes.
- Copper and copper alloys
- outdoors Coppers
- Copper polyethylenes
Similar products from EID
EID
France
800*800*2000 Add "FT" to the 3 letters of the reference (ex. TIBFT instead of TIB
EID
France
The Bi TUBES is an assembly of 2 insulated tubes, joined by the insulation. It allows both diameters to be inserted in one operation when installing.The insulation looks good, does not attract dirt, offers an excellent resistance to UV and to pinching.
EID
France
The insulated tube is used to manufacture tubing. In the 0.7mm version, it is more economical for an equivalent quality (SUPERCLEAN) In 30 or 50m coils in Mono and 20, 25 or 30m in insulated Bi-tubes, it can be cut and flared on the site.The insulated copper coil offers the advantage of being independent on-site and tubing can be cut to the required length.Tubes are already insulated which saves time during installation.For UV resistance of insulation outdoors, use paint PIN75 (page 15)