DCX-22AA-CTD
Data loggers
Description
The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
- Measurement and regulation equipment and instruments - pressure
- Data logger
- Recording the pressure and temperature
- Multi-Parameter Loggers
Product characteristics
- Pressure Ranges
- 0…10 to 0…100 mH2O
- Total Error Band
- ± 0.1% FS @ -10 ... 40 ° C
- Reading capacity
- 114'000 measuring points
- Dimensions
- ø 22 mm
- Special characteristics
- Additional conductivity measurement
Documents
Similar products from KELLER PRESSURE
KELLER PRESSURE
Switzerland
The DCX-22-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
KELLER PRESSURE
Switzerland
The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.
KELLER PRESSURE
Switzerland
The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.
KELLER PRESSURE
Switzerland
The remote data transmission unit ARC1-Tube with logger function is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.