Features ■ Differential pressure transmitter with metallic diaphragm ■ Function modules: Multifunctional display; Switching module with 2 floating channels; HART® module ■ Function module replacement on site without recalibration, „plug and measure“ ■ Nominal ranges 0.4 up to 40 bar ■ Turndown 5:1 ■ Accuracy ≤ 0,15 % ■ Output signal: 4…20 mA; alternative with PROFIBUS PA ■ Output functions: linear, invers, table function ■ Stainless steel case in sturdy design, degree of protection IP 69K ■ Media temperature -40...100 °C ■ Wetted parts stainless steel ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate and calibration certificate as per EN 10204-3.1 - Classification per SIL2
Germany
Bourdon takes mechanical pressure monitoring into the digital age This innovative device fits to any comprehensive platform for machine and process monitoring as well as the preventive maintenance of equipment which is supported by a LoRa wireless protocol. Key applications include pressure measurement and monitoring for oil refineries, petrochemical industry and biodiesel plants. More predestined applications are in waste and water treatment, power generation and transmission, general process industry, building services and civil engineering. The right choice when industry grade wireless pressure measurement and monitoring is required
Request for a quoteGermany
We plan, build and deliver turnkey test systems for electronic and mechanical components. For example, these are test benches for quality assurance, validation and production departments of companies in various industries. Our services include e.g.: - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design - Risk assessment and CE - Commissioning, service, maintenance at home and abroad
Request for a quoteGermany
The electronic temperature switch of BEDIA is fitted with thin-film resistor Pt 1000 in a bridge circuit. This sensor element provides close switch point tolerances and a quick response. Switch point and reset hysteresis may be selected within the admissible operating range when ordering so as to allow the monitoring of both very wide and very close temperature ranges. The switching output is protected from short-circuit and overload. The short-circuit current is limited by the output transistor switching off inthe event of a fault. It will automatically reset as soon as the fault has been remedied. The switch is available with ground-connected, plus-connected or potential-free DC switching output. The switch is open in the event of power failure or disconnection of the power supply, independed of the switching function. It is available both as normally open (NO) or normally closed (NC) switch.
Request for a quoteGermany
The SHS combines a hinge and safety switch in one single functional unit. — System up to performance level e: 2 SHS, each equipped with a positively opening safety contact — The angle range extends from 0° to 225° — Safety device ensures positive locking after the switch has been set
Request for a quoteCreate one request and get multiple quotes form verified suppliers.