Flat duct connector with damper made of white ABS plastic. The damper regulates the air flow in the ventilation system. It is available with dimensions of 110x55mm. It connects the flat D/P elements of the ventilation system. The elements of the ducts are joined using the "push-in" method without the need for sealing. Element made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.
Poland
Connector elbow made of white ABS plastic. The 100 mm elbow connects D/O 100 round ducts or 100 mm grilles/fans at an angle of 67° or 90°. The 125 mm elbow connects D/O 125 round ducts or grilles at an angle of 67° or 90° /fans with a diameter of 125. Duct elements are connected using the "push-in" method without the need for sealing. Element made in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.
Request for a quotePoland
The KZP DOSPEL 220x55 ventilation endings with an external flat grille offer a practical solution for ventilation systems. Equipped with a damper, these grilles prevent the backflow of air, ensuring efficient airflow control. They are easy to assemble and specifically designed for use in low and medium pressure ventilation systems. With a traditional look, these grilles can seamlessly blend into various building types and architectural styles. DOSPEL's 50 years of experience in production guarantee the highest quality standards, ensuring reliability and durability. Choose the KZP DOSPEL 220x55 ventilation endings with an external flat grille for effective airflow management and a visually pleasing solution for your ventilation needs.
Request for a quotePoland
Modern and easy-to-use wall fan equipped with a 100mm damper. The damper prevents the backdraft effect and prevents insects from entering the rooms. The fan is made of ABS plastic. Varnishing with a UV coating means that the white-dyed fan does not turn yellow, but retains its original color. The fan has an IPX4 protection level, which means that it is resistant to water splashes from various directions and class II insulation, so it is protected not only against direct but also indirect contact thanks to the introduction of additional insulation. The fan is designed for wall mounting due to the use of a plain bearing.
Request for a quotePoland
The M-Box fan is used for general ventilation in rooms where people stay. All motors used to drive the fan have thermal winding protection against overload. The fan capacity is regulated by voltage regulation or by means of a frequency converter. It was produced in Poland. 50 years of DOSPEL experience in production is a guarantee of the highest quality.
Request for a quote