Pairing is achieved with bearings of identical tolerance classes and by applying an axial preload to the inner rings for the O arrangement and on the outer rings for the X arrangement. The inner or outer rings are undergo a separate grinding operation to align both side faces on the same plane with minimum clearance.
Switzerland
Double-row angular contact ball bearings are used in applications when heavy radial, thrust or combined loads demand axial rigidity of the shaft are required. This is similar to a duplex pair of single- row bearings due to its two rows of balls and angular-contact construction, which provide greater axial and radial rigidity than can be obtained by using a single-row radial bearing. We manufacture these ball bearings with a minimum bore diameter of 3 mm to a maximum outer diameter of 47 mm.
Request for a quoteSwitzerland
Packaging is a very important parameter for the retention of the bearing quality during transport and storage. It is designed to protect the bearings against corrosion, dust, and other pollutants. Apart from that, each unit is labeled and carries all the relevant information concerning the technical and quality features of the bearing. The production batch number is printed on the label and guarantees the traceability of the product, as well as the identification of the manufacturing date. Therefore, it is advisable to unpack the ball bearing only prior to use or assembly.
Request for a quoteSwitzerland
The noise level is an important quality criteria of a ball bearing. It mainly depends on the following factors: precision of the geometric forms surface finish of the raceway and the balls cleanliness of the bearing type of lubricant type of cage rotational speed
Request for a quoteSwitzerland
It is even possible to apply a coating on the outer ring, before assembling the bearing, thus guaranteeing the best possible geometrical forms. The machining of grooves ensures that the coating perfectly adheres to the metal surface. Additionally, a wider temperature range may be covered.
Request for a quote