Dust Collector

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

Properties • suitable to be placed on top of a silo • jet-pulse cleaning by compressed air • bag or cartridge filter elements • available filter area from 2 m² to 60 m² • removal of the filter elements (clean gas side) from above via hinged cover • available with lateral fan on request (0,75 ÷ 11 kW) • available diameters DN540 and DN790 • body always made of stainless steel 1.4301 and cover made of aluminum • parts in contact with the product in mild steel or stainless steel

hollow cathode ion coating equipment

▪ Contactless application ▪ Suitable for lubricants, greases, anaerobic and other adhesives ▪ Materials with low as well as high viscosity applicable ▪ vipro-SPIN feeded by ViscoTec 3RD3 or 3RD4 dispenser ▪ Four different spinning heads available ▪ Continuous spraying ▪ Easy integrateable to different control unit systems due to open end cable