EZ-Splice™ Belt Joining Strand

The Eddie Wire Straightening Tool has been designed to work with Flat-Flex® and Flat-Flex® XT® belts. Straightening wire strands during belt joining, regular maintenance checks, and at the beginning / end of each shift is vitally important. The three ends of the wire straightening tool have been machined with slots that accommodate multiple wire diameters each.

Conveyor Belt clips are used for joining the belt during installation and for making fast minor repairs to the belt. They are available in one space and three space units. If you would like clips, these should be ordered at the same time you place your belt order.

Joining tubes can be used to create a hybrid join between a full strand weave and the use of joining clips. A single strand is cut into smaller single space sections, which are woven into the belt and joined together by crimping a stainless steel joining tube onto the adjacent wire sections. This method maintains the belt strength of a full strand weave while eliminating the distortion that occurs during the weaving process. It is important to consider whether joining tubes could mark product or have hygiene implications when choosing this method.

Wire Belt’s innovative line of Clean-Sweep™ sprockets are specifically designed to deflect the amount of product buildup accumulated on your conveyor’s drive. This means that there is less of a chance for product loss & carryout, belt skipping due to product buildup, and belt breakage due to incorrect contact with the sprocket teeth. Clean-Sweep™ sprocket’s tooth chamfer is machined to reduce drive friction and can lengthen belt life.