Electrical flange type immersion heaters

Electrical flange type immersion heaters The series of electrical Flange Type FHK-L provides a solution for the heating of liquids / molten salts or similar applications in process tanks or underground tanks. It can also be tank filling levels with very low heat, since only the lower horizontal portion is heated. The flange heater consists of a number of heating elements, which are built into the process flange. The electrical wiring is done in a robust electrical terminal box.

Flameproof immersion heaters ATEX II 2 G/D EEx d IIC IECEx Exd IIC T1 – T6 Ex tD A21 IP66 T…°C The EXHEAT “FP-C” range of flameproof core immersion heaters offers a hazardous area heating solution for oil and similar applications where a low heat density is required. The special element / sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of element cores fitted into a mounting flange. A robust EEx d terminal cover protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.

EEx’e‘ certified immersion heater EEx e T1 – T6 ATEX The “FHK-Exe” type electric immersion heaters are EExe certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The range of immersion heaters type FHK-Exe offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust Ex’e’ terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.

Electrical flange type immersion heaters The range of immersion heaters type FHK offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.