Electro-permanent lifting magnet FXE

FXE-R electro-permanent lifting magnets that can lift round material or, both round and flat material, we manufacture from our FXE basic models with pole shoes that can lift the customized diameter band widths, individually or in layers. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE-MH electro-permanent lifting magnets are especially suitable for transporting slabs and blocks. The electro-permanent modules type MH are designed to safely lift large loads with a large air gap. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

Equipped with pole type 50+ in long narrow design and a maximum load capacity of 400/600/1000 kg, which is achieved with material thicknesses from 15mm, these easy-to-guide and operate devices are recommended for lifting battens, rails, pipes, beams and bars. Also using pole extensions, which make it easier to position the magnets on long narrow bars.

The use of pole reversal control devices to control lifting magnets makes it possible to adjust the magnetic field very precisely. Thus, the USGs can be continuously adjusted in holding force and perform a demagnetizing cycle when switched off, which ensures that all parts are released and unwanted residual magnetism in the workpiece is minimized. USG pole reversal control units can be controlled via potential-free contacts with machine controls or pushbuttons in the crane operation and provide feedback on their switching status. As an option, we can also supply manual control units and signal lamp sets to match the pole reversal control units.