Encoder fittings

The range of incremental encoders fit to be coupled to motor shafts includes different mechanical types: the series RE400, with flange diameter 53.5 mm and RE470, with flange diameter 72 mm, provide a coupling joint, while the series RE410 and RE450 avail on a hollow shaft. Different measures are available for the joint hole and for the shaft diameter. All the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for all the series (type RE401/RE411/RE451/RE471)

The small size encoders series RE40 feature great accuracy, compact size and stoutness. The incremental encoder RE40 can be supplied with different mechanical flanges: the type RE40 has 6 fixing holes on diameter 30 mm, while the encoder E40V has a front fixing screw, and the series RE40Q is provided with a square flange of mm 43×43. The types RE40M and RE40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (RE40 or RE41). The aluminium housing, with axial or radial cable gland, grants IP65 protection degree against environmental agents.

The linear magnetic measuring system TM+MP200 consists of the magnetic transducer TM and the magnetic band MP200. The transducer works contactless, releaving the polarized fields of the magnetic band and converting the measure into digital signals. The system can be profitably employed in severe industrial environments, in presence of water, oil or grease. The mounting method is easy and cheap and the measure is accurate and repeatable. The scanning head TM is contained in a compact and strong metal case, and it is available with reading resolution 0.1 mm (TM10) or 0.01 mm (TM100). An electronic zero pulse is generated each 4 mm (type TM10C/TM100C), or matching with one or more external magnets (TM10E/TM100E).

Compact sized encoders series REC fit to any application where short body dimensions are required – the case length only measures 38 mm. REC encoders are available with different mechanical versions: with round flange and servo copling (type REC520/REC540), square flange (REC620) or hollow shaft, with (REC450) or without elastic support(REC440). The case is out of strong aluminium and connections are ensured by the connector type M12, or optionally by cable. The encoder with M12 connector output is UL Listed for the canadian and US markets. The pulses per revolution number ranges from 2 to 12500.