Energy recovery ventilator
HRU-SlimAIR-250E-H
Description
The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC fans. Thanks to a counterflow heat exchanger made of a plastic (PET), it achieves up to 90% heat recovery An ERV version with an enthalpy exchanger that recovers moisture is also available. Builtin electric preheater protects heat exchanger against freezing, wireless radio communication connects controllers and sensors, and all of it is enclosed inside a selfsupporting, insulating EPP casing. HRUSlimAIR can be installed in up to 3 positions, thanks to a special condensate drain system.
- Components and parts for small household appliances
- energy recovery ventilator
- erv
- energy recovery ventilation
Similar products from ALNOR VENTILATION SYSTEMS LTD
ALNOR VENTILATION SYSTEMS LTD
Poland
The HomEvap adiabatic humidifier is designed for domestic mechanical ventilation systems with a maximum airflow 600 m3/h. Filtered water (Legiosafe®) naturally evaporates on a special matrix, and then the humidified air is distributed to the ventilation duct system and to the connected rooms. The humidification process is regulated by a wireless room controller and a duct sensor. Builtin PTC heater compensates for temperature losses caused by the evaporation process. The housing is made of EPP, while the matrix is made of fiber glass.
ALNOR VENTILATION SYSTEMS LTD
Poland
HHS wall diffuser for fresh air supply. Male connector with gasket for fast connection with SPIRAL® duct. Powder painted with white RAL 9010 colour which provides additional protection from corrosion in places with high humidity, such as bathrooms. An excellent choice when celling mounting is out of the scope or the interior design requires a wall diffuser. It can be used in offices, residential houses and mounted just under the ceiling as well.
ALNOR VENTILATION SYSTEMS LTD
Poland
The LDS linear slot diffuser are intended for ceiling or wall installation. The product can supply warm or cold air. The diffuser can feature from 1 to 4 slots, 495 mm or 990 mm in length, depending on the product version. Each slot enables separate air flow direction adjustment and is provided with two deflector vanes. This design enables easy adaptation of the air flow diffusion direction according to actual indoor conditions. With this easy adjustment functionality, the LDS linear slot diffusers are ideal for variable air output ventilation systems
ALNOR VENTILATION SYSTEMS LTD
Poland
GCR swirl diffuser is equipped with fixed blades bent at a constant angle. It is made of galvanized steel sheet, powder coated in RAL9010. Swirl diffusers ensure mixing of the fresh air stream with the room air, which is recommended for supplying cold air. They provide a stable flow of the stream and are intended for rooms up to 4m high, for example in public facilities such as hotels, restaurants, office buildings. The perforated plate leads to rapid air flow velocity decrease at low noise levels.