The CAN-EtherCAT gateway can link CAN modules with CANopen (CiA DS 301) or layer-2 (ISO 11898-1) implementation to a realtime EtherCAT network. The EtherCAT slave functionality is in accordance with ETG Modular Device Profile No. 5000. The module can also be configured as Ethernet switch port using the EoE protocol. Firmware updates are possible via web interface (EoE) or FoE (File access-over-EtherCAT). The CAN high speed (ISO 11898-2) compatible interface allows a maximum data-transfer rate of 1 Mbit/s. The 100BASE-TX EtherCAT interface is compatible to IEEE 802.3 and runs with 100 Mbit/s. The EtherCAT as well as the CAN interface are electrically isolated. Customization on Request.
Germany
This EtherCAT I/O module has been specifically designed with industrial environments in mind. Its IP 65 protection allows its installation anywhere at the machine making switching cabinets and further housings more or less redundant. You may mount the unit directly on a base plate. Due to the modules integral plug connector system, sensors and actuators are never far away from the modules. Standardised cable connections reduce mounting times while enhancing the security of the wiring. The IP65 EtherCAT I/O modules are intended for mechanical & plant engineering applications also in conjunction with systems other than those supplied by Kendrion Kuhnke Automation.
Request for a quoteHong Kong
The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver • RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core • Jumbo frame support up to 16KB • 125MHz reference clock output
Request for a quoteTurkey
Three-phase protection for TNC-S System High discharge capacity ,quick response,pluggable Multifunctional conneciton for conductors and busbars Green window will change to red when fault and also provide remote alarm control at the same time
Request for a quoteChina
Place of Origin: China Base Material: FR-4 Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ Board Thickness: 0.8mm Min. Hole Size: 0.1mm Min. Line Width: 0.065mm Min. Line Spacing: 0.065mm Surface Finishing: HASL Application: Electronics Device Type: Customizable Solder mask: Black Material: FR4 CEM1 CEM3 height TG Color: Red Blue Green Black Testing Service: 100% Supply Ability: 25000 Square Meter/Square Meters per Month
Request for a quoteCreate one request and get multiple quotes form verified suppliers.