Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie outside material: 2.4610 inside material: PTFE (s=5mm) DP 10 bar DT 230° C ax. mov. +/-30 mm
Germany
Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie chamber expansion joints DN50 / DN150 / DN200 DP inside 6 bar DP outside 4,5 bar DT 155° C ax. mov. +/-15 mm lat. mov. +/-10 mm
Request for a quoteGermany
The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L material with high chemical resistance and temperature resistance: 1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials: 1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit
Request for a quote