Extension 60 mm for terrace pedestals
Description
The extension adds 60 mm to the height of the terrace pedestal. This accessory is only compatible with decking and paving pedestal 150 to 260 mm high. It is possible to add up to 4 extensions on a pedestal to reach a maximum height of 70 cm. The pedestal extension is ideal for constructions with a large range of height to catch up. Once the extension is placed on the pedestal, it benefits from the same properties as the other pedestals and accessories of the mark. It withstands loads up to 1 ton, withstands variations in temperature from 40°C to + 60°C, UV rays, frost as well as acid and chemical products. Made in France, the RINNO PLOTS terrace pedestal extension is designed from polypropylene, a recycled and recyclable material. This product is respectful of the environment. The RINNO PLOTS brand “extension 60 mm” complies with the standards DTU 43.1 and 51.4.
- Floors, raised
- Outdoor terraces
- garden laying-out
- terrace
Similar products from YEED
YEED
France
Designed to protect joists against moisture and rainwater and thus increase the life of the terrace. 100% waterproof band. Resistance Resistance to temperatures from 40°C to +60°C. Resistances to atmospheric agents UV and freeze. Robust, the band is tearproof and nondeformable. 100% waterproof, protect and extends the service life of the joists structure. Manufacturing Made in France, the RINNO bituminous tape is made with bitumen, aluminium foil and silicone protection. Conformity RINNO bituminous tape comply with current standards DTU 43.1. Self adhesive bituminous tape Place the tape on a dry and clean support. Adheres to most building materials wood, plastic, glass, concrete, metal. Ideal for wood, roof, piping, framing… Robust, the band is tearproof and nondeformable. Reduce resonance when walking on the terrace. Protects and extends the service life of the joist structure.
YEED
France
The blades spacers allow you to obtain a regular spacing of the wood planks for terrace. This accessory for wooden decks helps prevent the natural movements of the wood can damage the installation, promote good air circulation and water evacuation. The deck board spacer is made up of 4 sides of different thicknesses 4, 5, 6 or 7 mm. The spacing of your deck boards between 4 and 7 mm must take into account the type of wood of the coating, the climate to which the terrace will be exposed as well as the desired aesthetic appearance. This easy and practical accessory ensures the durability of your deck. RINNO PLOTS “blades spacers” are made in France.
YEED
France
The adjustable slab pedestal is a support for making the foundations of a terrace raised. It is placed directly on a soft and stable ground without requiring fixing. The slab pedestal can be adjusted to the nearest 150 to 260 millimeter using the red screw. The head of the paving pedestal has 4 lugs which ensure that the slabs are held in place. Their place defines a regular spacing between each of them. The slab pedestal can accommodate a slabshaped coating whether it is tiling, ceramic or gratings. Use only a coating measuring 2 cm thick at least. To define the number of pedestals required, 4 pedestals are needed for 1 slab. Thus, the pedestals are position cladding tiles for terrace at each angle. If you use tiles of large dimensions, it is possible to place an additional stud in the center of it by cutting the dewclaws on the head.
YEED
France
The slab pedestal is a support designed for the realization of the foundations of a terrace in slabs. Adjustable in height from 90 to 150 mm, it allows the installation of raised terraces. The size of the pedestal is adjusted to the millimeter using the red screw. The head of pedestal for slab is composed of 4 pins allowing the correct placement of the slabs as well as their maintenance. The slab pedestal allows the installation of a coating of the slab, tiling or grating type. Note it is imperative to use a coating with a minimum thickness of 2 cm or more. The installation of the slab terrace on pedestals is carried out on a loose and stable ground in order to guarantee the solidity of the structure. A slab requires 4 pedestals, i.e. 1 at each corner, with possibility of adding one in the center by removing the lugs with the pliers.